• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Starting issues

  • Thread starter Thread starter chr1s11575stang
  • Start date Start date Dec 27, 2008

chr1s11575stang

New Member
Aug 16, 2007
64
0
0
Orlando, Fl
Dec 27, 2008
#1
  • Dec 27, 2008
  • #1
Ok replaces starter, starter solenoid, new battery. When I awent to start the car it sounded like the starter stuck and all of a sudden my negative cable started to smoke like mad. What can the problem be? THanks in advance.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Dec 27, 2008
#2
  • Dec 27, 2008
  • #2
You have a bad ground on the negative cable. Clean the cable connection where it bolts to the block down by the oil filter. If you have the battery post clamps that use 2 bolts to clamp onto the cable ditch them and get a real ground cable. Make sure you connect the computer ground pigtail to the battery ground when you replace the cable.

The computer has its own dedicated power ground that
comes off the ground pigtail on the battery ground wire. Due to
it's proximity to the battery, it may become corroded by acid
fumes from the battery. It is a black cylinder about 2 1/2" long
by 1" diameter with a black/lt green wire. You'll find it up next to
the starter solenoid where the wire goes into the wiring harness


The battery common ground is a 10 gauge pigtail with the computer ground
attached to it. The picture shows the common ground point for the battery to the body.

Picture courtesy timewarped1972


Some diagrams just in case you crossed some wires...

Starter solenoid wiring for 86-91 Mustang



Starter solenoid wiring 92-93 Mustang or upgraded high torque mini starter.
 

chr1s11575stang

New Member
Aug 16, 2007
64
0
0
Orlando, Fl
Dec 29, 2008
#3
  • Dec 29, 2008
  • #3
okl that worked now my starter is clicking does that mean i shorted out the starter too?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Dec 29, 2008
#4
  • Dec 29, 2008
  • #4
Check the battery voltage or jump the battery with one from a car that cranks OK.
 

chr1s11575stang

New Member
Aug 16, 2007
64
0
0
Orlando, Fl
Dec 31, 2008
#5
  • Dec 31, 2008
  • #5
ok i did all that you said and it still didnt work so i took the starter back oput and took it back and it was defective so i put the new one in and it started right up. so thank you for the help
 
You must log in or register to reply here.

Similar threads

3
Electrical Starter solenoid out of space?
  • 387lx
  • Jan 22, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
516
Fox 5.0 Mustang Tech Jan 23, 2026
387lx
3
D
Mustang not starting
  • Dawry Ramos
  • Sep 12, 2026
  • 2015 - 2023 Specific Tech
Replies
10
Views
398
2015 - 2023 Specific Tech Oct 3, 2026
Dawry Ramos
D
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
584
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
380
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
3
Views
258
1965 - 1973 Classic Mustangs -General/Talk- Oct 17, 2026
SchwarzStock
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?