Ok so here we go... I have an 81 capri, started as a v6 car, now has a 302 that is "bored 30 over" so the former owner says. Not sure really. well I got ahead of myself and decided id go ahead and throw a huge intake (parker fw) on top with a 650cfm on top and headman shortys, put it all back together and found tons of water in the oil so now im tearing it down again, couldnt find why. maybe because my "buddy" decided to cut the side tabs off the intake gasket front and back and water was spraying all over the place, maybe some got in the valley and leaked down. Either way im back down to bare block with what i think are stock pistons. (big circle in center with cut outs for valve clearance) I have a set of E7TE heads with some pocket porting and proform roller rockers, and the stock G50E heads pulled off the motor. Now my question is...Looking for a decent top end, without breaking the bank. I want to run at least 350 to the wheels and still be able to run the streets. was thinking mild cam, gt40p's, same headers and carb. now i have the fw intake still and an edelbrock performer. SOMEONE HELP!