• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Steps To my next mods...

  • Thread starter Thread starter Mustanggt108
  • Start date Start date Jan 31, 2006
M

Mustanggt108

New Member
Sep 23, 2005
221
0
0
Jan 31, 2006
#1
  • Jan 31, 2006
  • #1
After all the bolt-ons in my sig. These are my Next steps:

Step 1 : Mongoose kit(NOVI2000) + Wideband O2 with Gauge.

Step 2 : Rims + 275 Nitto DR's.

Step 3 : Stalker rear Bumper.(Maybe)...
So what do you guys think?am i on the right track!?

NOTE: Suspension work comes a bit later.
------------------
alex
 

reddrgn01gt

New Member
Jun 8, 2005
161
0
0
Pittsburgh, PA
Jan 31, 2006
#2
  • Jan 31, 2006
  • #2
I would say yeah you are on the right track. I would look at getting long tubes at some point to open up your exhaust a little more but they are not necessary. I would also think about getting a forged rotating assembly so that you can take a little more advantage of that novi. If you aren't planning on ever getting forged internals you really don't need that big of a blower in my opinion.

Edit: I would also ditch the weld in flows and get a catback.
 
M

Mustanggt108

New Member
Sep 23, 2005
221
0
0
Jan 31, 2006
#3
  • Jan 31, 2006
  • #3
Long tubes ...No. I will ditch the weld-ins for sure and get a catback , when the time is right.The Novi2000 is a great blower . I might even go with the vortech mongoose kit
 

reddrgn01gt

New Member
Jun 8, 2005
161
0
0
Pittsburgh, PA
Jan 31, 2006
#4
  • Jan 31, 2006
  • #4
Mustanggt108 said:
Long tubes ...No. I will ditch the weld-ins for sure and get a catback , when the time is right.The Novi2000 is a great blower . I might even go with the vortech mongoose kit
Click to expand...

If you don't forge the internals the vortech can get you to the 400 rwhp (and then some) mark that everyone says the rods and pistons are good to.
 

DocG

5th graders > me. They're not bant
Sep 25, 2005
8,297
1,358
194
49
Cincinnati area
Jan 31, 2006
#5
  • Jan 31, 2006
  • #5
Wow...quadruple post! Sounds like a good plan...but with the Vortech I'm assuming you're doing a dyno tune. Might be a good time to just get the LT's thrown on too if you had the cash, and just get it dyno tuned once. Also, why are you going with the Wideband O2...you going to tune it yourself...or just to be able to monitor it?

Do the suspension mods before the Stalker bumper!
 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jan 31, 2006
#6
  • Jan 31, 2006
  • #6
Mustanggt108 said:
After all the bolt-ons in my sig. These are my Next steps:

Step 1 : Mongoose kit(NOVI2000) + Wideband O2 with Gauge.

Step 2 : Rims + 275 Nitto DR's.

Step 3 : Stalker rear Bumper.(Maybe)...
So what do you guys think?am i on the right track!?

NOTE: Suspension work comes a bit later.
------------------
alex
Click to expand...
That is going to be one awesome Mustang, already is actually with the mods you already have. I am not sure about longtubes. They are extremely cool but so expensive plus you would need new midpipe... I think that cams would cost the same as longtubes and I would do some blower cams. You should try to do both really but it will add significant cost. What is your budget?

When you do suspension are you just going to do a MM box or are you going to get fancy?

Also, I would just forget about the wideband O2, your tuner will have one and that is when it will really matter anyway. If you have a good tuner you will have confidence in your air to fuel ratio. Not getting wideband O2 will save you $350

If you are going to change rear bumper cover, best to do Cobra or V-6 for the sleeper look
 
M

Mustanggt108

New Member
Sep 23, 2005
221
0
0
Feb 1, 2006
#7
  • Feb 1, 2006
  • #7
DocG2828 said:
Wow...quadruple post! Sounds like a good plan...but with the Vortech I'm assuming you're doing a dyno tune. Might be a good time to just get the LT's thrown on too if you had the cash, and just get it dyno tuned once. Also, why are you going with the Wideband O2...you going to tune it yourself...or just to be able to monitor it?

Do the suspension mods before the Stalker bumper!
Click to expand...
nope.No dyno tune.I'm gonna use Tim's tune that comes with the mongoose kit.Thats why i need the wideband , so i can monitor my A/F ratio and make sure everything is going well.
 
M

Mustanggt108

New Member
Sep 23, 2005
221
0
0
Feb 1, 2006
#8
  • Feb 1, 2006
  • #8
Kilgore Trout said:
That is going to be one awesome Mustang, already is actually with the mods you already have. I am not sure about longtubes. They are extremely cool but so expensive plus you would need new midpipe... I think that cams would cost the same as longtubes and I would do some blower cams. You should try to do both really but it will add significant cost. What is your budget?

When you do suspension are you just going to do a MM box or are you going to get fancy?

Also, I would just forget about the wideband O2, your tuner will have one and that is when it will really matter anyway. If you have a good tuner you will have confidence in your air to fuel ratio. Not getting wideband O2 will save you $350

If you are going to change rear bumper cover, best to do Cobra or V-6 for the sleeper look
Click to expand...

thx for the compliments killy.Well i'm making good money , so i dont really have a tight budget.But i am planing on getting the 07 GT500 this summer .So i dont wanna spend everything i have on this one.As you know , i wont be able to get a dyno tune around here , so i will have to do with the tune Tim sends with the kit, and then monitor it like i mentioned above.i dont think i need blower cams , since i will be around 380-400rwhp after the mongoose , and that is my goal for the 04 GT.
 

the98stang

Active Member
Aug 12, 2005
2,408
0
47
39
Clovis, CA
Feb 1, 2006
#9
  • Feb 1, 2006
  • #9
I hate all you fools with money lol. My next mod will be "Get a new job".
 
M

Mustanggt108

New Member
Sep 23, 2005
221
0
0
Feb 1, 2006
#10
  • Feb 1, 2006
  • #10
the98stang said:
I hate all you fools with money lol. My next mod will be "Get a new job".
Click to expand...
loool , but i wasnt born rich ...come to think of , i'm not rich at all even now lol
i just make good money coz i work hard and have a good job.
 

DocG

5th graders > me. They're not bant
Sep 25, 2005
8,297
1,358
194
49
Cincinnati area
Feb 1, 2006
#11
  • Feb 1, 2006
  • #11
If you're getting a GT500 soon....how come you want to spend that much money on the GT....is the GT going to become your winter car!? No attack meant here, just curious.
 

BooWFO

New Member
May 10, 2005
991
0
0
51
Louisville, KY
kentuckianastreetmachines.com
Feb 1, 2006
#12
  • Feb 1, 2006
  • #12
Is the 04 gonna be the track superstar?
But the list looks ok to me. Although I'd really move the suspension up higher than the bodykit stuff, but that's me.
 

reddrgn01gt

New Member
Jun 8, 2005
161
0
0
Pittsburgh, PA
Feb 1, 2006
#13
  • Feb 1, 2006
  • #13
If you are getting a gt500 save your money and mod it. Look at how well the 03-04 cobras respond to simple mods. I am sure the gt500 has enormous potential with the blown 5.4 4v. Imagine the power coming from a free flowing exhaust and a KB sc swap on one of those .
 
M

Mustanggt108

New Member
Sep 23, 2005
221
0
0
Feb 1, 2006
#14
  • Feb 1, 2006
  • #14
DocG2828 said:
If you're getting a GT500 soon....how come you want to spend that much money on the GT....is the GT going to become your winter car!? No attack meant here, just curious.
Click to expand...
its cool.Actually i only drive my GT on my off days, which means 3 days a week.I use a small import for when i go to work lol
the reason i wanna spend so much on this one is because i love it so much.And i wont spend anymore , just $3700 for the mongoose , and then suspension upgrade and then i'm done.
 
M

Mustanggt108

New Member
Sep 23, 2005
221
0
0
Feb 1, 2006
#15
  • Feb 1, 2006
  • #15
BooWFO said:
Is the 04 gonna be the track superstar?
But the list looks ok to me. Although I'd really move the suspension up higher than the bodykit stuff, but that's me.
Click to expand...
LOL , well when i first bought it i was thinking of slamming on the HP twin turbo set up.But we dont have a track here. So i think 380-400rwhp is enough for street use.
no body kit stuff , just the rear bumper , and it will come at the end , after everything else is done
 
You must log in or register to reply here.

Similar threads

M
Progress Thread mkk50's Progress Thread
  • mkk50
  • Aug 4, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
798
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 22, 2025
Noobz347
V
A 20 year old car, with many faults!
  • Virus101
  • May 4, 2020
  • SN95 4.6L Mustang Tech
Replies
7
Views
2K
SN95 4.6L Mustang Tech May 9, 2020
Cobra262
C
Holley Sniper review - The good, the bad, and learn from my frustration
  • LX Dave
  • Aug 14, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
37
Views
61K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 19, 2026
AeroCoupe
Progress Thread finishing touches on my stroker build
  • doobismaximus
  • Jul 2, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 1, 2021
nickyb
Drivetrain 33 spline SN axle with ABS and parking brake build
  • revhead347
  • May 12, 2020
  • 1994 - 1995 Specific Tech
Replies
2
Views
3K
1994 - 1995 Specific Tech May 12, 2020
revhead347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?