Stereo wiring HELP!!!!!!!!!!!!!!!!!

run down to best buy and buy a new wiring harness. it will be a lot easier

Stereo wires

I busted out my factory electrical/vacuum troubleshooting manual for my 87 and this is what I got: Light green/Yellow= 12V hot at all times
Yellow/Black= 12V hot in acc or run
Orange/BLack= Day/Night Ilumination relay
Light brown/Red= Instrument Illumination
Light brown/White= LH Dash and Door speaker
Orange/Light green= LH Dash and Door speaker
Dark Green/Orange= RH Dash and Door speaker
White/Light greem= RH Dash and Door speaker
Pink/Light brown= LH rear speaker
Pink/Light green= LH rear speaker
Pink/Light brown= RH rear speaker
Dark green/Orange= RH rear speaker
Red= ground
I realize that some of these are used more than once so if you can, get clip leads and an ohmmeter or test light and figure out which is which. As far as polarity, the book doesn't say.

Aryan15 said:

I realize that some of these are used more than once so if you can, get clip leads and an ohmmeter or test light and figure out which is which. As far as polarity, the book doesn't say.

Click to expand...

They use a common ground that still allows for balance and fader.