Rebuilt the front end and the rear end and CC plates put everything back together took the car for a drive and it drives fine really just a slight little vibration I mean very slight it's not even really noticeable to the point of doing anything or any harm in my opinion. I turn the steering wheel loose and it doesn't try to go all over the road even on a ragley road lol. What are the chances that I do not need an alignment? I followed sve's video with pretty much pulling the plates all the way to me toward the fender and then all the way toward the window as a good starting point.
The wheels look fine they are nice and straight no nothing odd looking about them and actually when I did my 94 and put on the hotchkas plates from the other car, it had a slight wheel inward look and I took it by drugs and he said it looks fine and just keep an eye on the tires and I'm probably good to go so I haven't even gotten that aligned a few years ago.
So I put on new control arms used bilsteins shocks and struts sve caster camera plates and in the rear end just for reference yeah it's totally rebuilt axle housing bushings used j&m arms off the other car, changed out opinion seal, new spring iso and the rear but I reused the fronts.
The wheels look fine they are nice and straight no nothing odd looking about them and actually when I did my 94 and put on the hotchkas plates from the other car, it had a slight wheel inward look and I took it by drugs and he said it looks fine and just keep an eye on the tires and I'm probably good to go so I haven't even gotten that aligned a few years ago.
So I put on new control arms used bilsteins shocks and struts sve caster camera plates and in the rear end just for reference yeah it's totally rebuilt axle housing bushings used j&m arms off the other car, changed out opinion seal, new spring iso and the rear but I reused the fronts.