• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

still poping/creeking sound when turning

  • Thread starter Thread starter Jaswir
  • Start date Start date Aug 20, 2006

Jaswir

Member
Mar 31, 2005
578
0
18
Orlando, FL
Aug 20, 2006
#1
  • Aug 20, 2006
  • #1
I replaced my

ball joints
Struts
Inner/Outter Tie Rrods
and sway bar bushings

and i still get the same sound!

so that leaves

a arm bushings

and bushings for my springs ( i reused my old ones when i install my lowering springs)

is there anything else im missing?

it only happens when i turn either slow or fast...

a arm bushing easy to change? just unbolt???
 

Jaswir

Member
Mar 31, 2005
578
0
18
Orlando, FL
Aug 20, 2006
#2
  • Aug 20, 2006
  • #2
ttt
 
I

iwashmycar

20+ Year Stangneter
Apr 7, 2004
1,236
1
39
Columbus, Ohio
Aug 20, 2006
#3
  • Aug 20, 2006
  • #3
i call A arm bushings....mine are doin it too i think


i guess you could put a jack under there...unbolt...lower an inch and reinstall
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Aug 20, 2006
#4
  • Aug 20, 2006
  • #4
I've seen broke spring isolators make that noise, also. We had a guy with a 99 Lightning come in said his ball joints were making a popping sound when backing up. He wanted them replaced. The passanger side ball joint did have some play in it. So, per his request, we replaced the whole upper control arm (ball joints are not serviceable on the F-150s) and it still popped. Turned out to be the spring isolators. Sucks for him.
 

Jaswir

Member
Mar 31, 2005
578
0
18
Orlando, FL
Aug 20, 2006
#5
  • Aug 20, 2006
  • #5
i think im gonna kill two birds with one stone replace the spring isolators and while im in there do my a arm bushings!


so ur saying i can unbolt my a arm with everything still installed? i don't have to take everything off brakes, struts, springs etc...???
 
G

genericstang

New Member
Dec 27, 2002
120
0
0
Marietta. GA
Aug 20, 2006
#6
  • Aug 20, 2006
  • #6
could be the wheel bearing(s) and/or spindle? i had the same sorta noise when i turned left at low or high speeds. might want to check that out.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,356
208
114
Ohio
Aug 21, 2006
#7
  • Aug 21, 2006
  • #7
Jaswir said:
i think im gonna kill two birds with one stone replace the spring isolators and while im in there do my a arm bushings!


so ur saying i can unbolt my a arm with everything still installed? i don't have to take everything off brakes, struts, springs etc...???
Click to expand...

Sounds like that would be difficult trying to press out and press in new Bushings while connected up. You might want to consider some FMS Lower A Arms.
 
You must log in or register to reply here.

Similar threads

Fox Alignment Suggestions
  • PonyGTrider
  • Jul 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
455
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 13, 2025
PonyGTrider
J
Severe shaking/vibrations in steering wheel
  • jacket999
  • May 20, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
805
SN95 V6 Mustang Tech Jun 1, 2025
NtheGAME
N
Still need an Alignment?
  • from6to8
  • Jun 1, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
290
1994 - 1995 Specific Tech Jun 2, 2025
AeroCoupe
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
657
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
Strut rattle
  • JD1964
  • Apr 13, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
28
Views
848
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 22, 2025
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?