i just got my 93' notch today. i had a powermaster on my 89, which we swapped over to this. so its just 93' wiring now vs my 89 harness. i have the jumper wire between the two posts on the starter, then we were using the 4g power wire. i never wired this starter in..
we went to connect power for starter, i have the 4 ga power wire, and then one small female tab connector. is this the stock wiring? i want the easiest way to get this car to start.
with the wiring connected as stated above (jumper wire between posts and only 4ga wire connected), and the small female tab not connected, it just cranks and cranks as soon as the battery is connected.
does anyone have pics of what/where to run wires i change from this? my wiring is all hidden behind the fender well, so i want to keep this as simple as possible. im near worthless with electrical work.
we went to connect power for starter, i have the 4 ga power wire, and then one small female tab connector. is this the stock wiring? i want the easiest way to get this car to start.
with the wiring connected as stated above (jumper wire between posts and only 4ga wire connected), and the small female tab not connected, it just cranks and cranks as soon as the battery is connected.
does anyone have pics of what/where to run wires i change from this? my wiring is all hidden behind the fender well, so i want to keep this as simple as possible. im near worthless with electrical work.