• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Stock Fuel Line

  • Thread starter Thread starter sen2two
  • Start date Start date Apr 2, 2017

sen2two

I've been lubing and pulling it all morning
5 Year Member
Jul 18, 2013
396
58
59
Apr 2, 2017
#1
  • Apr 2, 2017
  • #1
The stock fuel line that crimpes to the hard line down near the passenger side wheel area has and bend/crease in it directly after the crimped portion. Maybe 1/2" away. It may even be slightly cracked and leaking. I don't see how just this short section can be replaced by itselt because it is crimped. I only got 2 minutes to look at it and then it rained....

So, until I can get back out there and really look at it. Is this a replaceable section?
 
Last edited: Apr 2, 2017

sen2two

I've been lubing and pulling it all morning
5 Year Member
Jul 18, 2013
396
58
59
Apr 2, 2017
#2
  • Apr 2, 2017
  • #2
So I just went a took a look real quick, yes its still raining. Lol...

Not worth replacing that one section. I'm looking for a complete fuel line upgrade from there to the rails. Possibly the rails as well. Looks like the feed hard line would be a -4 and return a -6.

Can someone confirm this? It's raining harder now so I can't really get a good measurement at the moment.
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Apr 2, 2017
#3
  • Apr 2, 2017
  • #3
http://www.americanmuscle.com/russe...8793gt-FPReplacementV1&T5_Var3=blue&GID=56543
 

sen2two

I've been lubing and pulling it all morning
5 Year Member
Jul 18, 2013
396
58
59
Apr 2, 2017
#4
  • Apr 2, 2017
  • #4
Those lines are not the issue. It's the lines that those connect to that lead to the hard lines.
 

sen2two

I've been lubing and pulling it all morning
5 Year Member
Jul 18, 2013
396
58
59
Apr 2, 2017
#5
  • Apr 2, 2017
  • #5
Anyone here use this set up?

http://www.ebay.com/itm/131959202710?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT

I know, OBX. But I've used their stuff in the past. And never had an issue. It looks like it's a complete set up. But can't tell if those hose lengths reach to the hard lines in the engine bay, or all the way to the tank. Maybe someone here has used this set up and can inform me.
 

RangerJoe

I leave the horn on while driving
15 Year Member
Apr 26, 2010
2,560
1,146
184
Georgia
Apr 3, 2017
#6
  • Apr 3, 2017
  • #6
Are you referring to the nylon fuel lines that connect from the rails to the hardlines on the passenger's side frame rail?

If so, you can buy replacement pieces from the automotive store or places like jegs. Use a heat gun or hot water to soften the end of the line before sliding it over the barbs. It takes a little practice, but like most things, Google search it or YouTube it.

Joe
 

sen2two

I've been lubing and pulling it all morning
5 Year Member
Jul 18, 2013
396
58
59
Apr 3, 2017
#7
  • Apr 3, 2017
  • #7
I've decided to upgrade. I know the rails are good until a lot more power than I'll be making. But I noticed that somewhere in the cars life, the rubber hoses had been replaced. With rubber hose NOT meant for fuel. It says it right on the damn hose.

That's why I'm looking at the kit I posted above.
 
You must log in or register to reply here.

Similar threads

M
01 mustang 3.8 fuel pressure issue
  • Mhaley2006
  • May 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
537
1996 - 2004 SN95 Mustang -General/Talk- Aug 9, 2026
JohnKay
J
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
625
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
529
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
finding wiring from PCM to fuel tank pressure sensor
  • Roont
  • Oct 19, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
287
1996 - 2004 SN95 Mustang -General/Talk- Oct 19, 2025
Roont
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
493
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?