• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-

Striper I am not!

  • Thread starter Thread starter beviking
  • Start date Start date Apr 17, 2012

beviking

Active Member
Aug 29, 2011
228
9
29
Syracuse,NY
Apr 17, 2012
#1
  • Apr 17, 2012
  • #1
Thought I'd share in case misery needs any company...

Cue the violins.

Took the day off to put c stripes and lemans strips on. Figured I'd start with the c stripes cuz they'd be harder. Got the passenger side on, had to cut the door handle cut-out back cuz I made a jagged cut. Oh well, I know it's mine. Did the drivers side and must have left my brain on the other side cuz I measured to the edge of the fine pinstripe instead of the thick section from the wheel opening. Didn't realize it because the backing paper is so thick but it put the hole for the 5.0 emblem right between the thin pinstripe and thick center! I was so p.o'd I pulled the thin pinstripe off in a couple spots and when I tried to correct it, I creased it. So, I took a few deep breaths and thought maybe the lemans stripes would turn out so good I'd get over it. Things seemed to go smooth on the hood, had to lift the front edge towards the end a couple times but it looked pretty good and smooth. Let it dry a bit and pulled the backing paper off to find zig zag creases near the front edge. So I thought I could try to lift it and stretch it to get them out. It stretched alright, just before it ripped and my blood pressure hit 200! Decided to pull it off and find someone who knew what they're doing.

Never did stripes before, thought I'd give it a shot since it looked so easy in the videos and directions The window louvers, oil seperator and flip up license plate holder went on with no problem, but they didn't take any skill. I'd post pics but I'm just in such a state of denial I don't think I can figure out how to run the camera! At least AM will be happy when I order another kit or two. Sad part is I only need the hood, I have enough for the rest. Maybe whoever I find to do the job will have 12" gloss black stock. Hm, now that I think about it, maybe they'd be able to cut a matching c stripe that goes on the front fender panel and I could leave the rest as is? I'll let you know what I find out.
 
H

Hoowasat

Member
Jul 27, 2011
54
0
6
Newport News, VA
Apr 18, 2012
#2
  • Apr 18, 2012
  • #2
Don't beat yourself up too bad. We've all been there one time or another.
 

BackInBlack

5 Year Member
Oct 9, 2011
433
26
49
Southern California
Apr 18, 2012
#3
  • Apr 18, 2012
  • #3
you do stripes once....the second time comes so natural..
 

beviking

Active Member
Aug 29, 2011
228
9
29
Syracuse,NY
Apr 18, 2012
#4
  • Apr 18, 2012
  • #4
Yeah, 2nd will be a charm for the c striped, but I'm still hoping my buddy will come thru for the lemans, otherwise I'll have to get another guy with 1/2 a brain and hopefully between the two of us, we can make it 80% decent
 

majik755

New Member
Jun 16, 2011
8
0
1
Alexandria, VA
Apr 19, 2012
#5
  • Apr 19, 2012
  • #5
Feel your pain, found out I can do some of the smaller stuff but was well worth the money and lowered blood presure letting a pro do the majority of my stripes...
 

JC30655

New Member
Jul 25, 2010
1
0
1
Georgia
Aug 17, 2014
#6
  • Aug 17, 2014
  • #6
A few beers helps!
 

beviking

Active Member
Aug 29, 2011
228
9
29
Syracuse,NY
Aug 17, 2014
#7
  • Aug 17, 2014
  • #7
Wow, I never followede up on this. Thanks for the revival JC! Long story short, I never tried the lemans stripes again. My kids decided the box the stripes were in was a good box to shoot arrows into! That was my sign not to do them...and that my kids need more supervision!
The c stripe went on much easier the 2nd time! Still have em on and look great!
 
You must log in or register to reply here.

Similar threads

C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
627
Fox 5.0 Mustang Tech Jun 5, 2026
KRUISR
Electrical Ron Francis Headlight / Alternator Harness
  • dan50
  • Apr 30, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
204
Fox 5.0 Mustang Tech Apr 30, 2026
dan50
G
Intro and FB questions
  • gflat65
  • Nov 16, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
197
1965 - 1973 Classic Mustangs -General/Talk- Nov 25, 2025
horse sence
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
111
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
330
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?