stroker with thumpers and tmoss

old_blue

15 Year Member

Nov 3, 2003

1,783

282

124

Jan 11, 2004

#1

• Jan 11, 2004

• #1

Ok, my motor has 120+k on it and I was going to add a tmoss lower and thumper heads plus a cam (not sure which) if I were to rebuild and build a 347 stroker would those heads and intake work, not just work but work really well? or would I be wasting money in the thumper heads and tmoss porting???

 

TIMMY2734

Founding Member

May 17, 2002

1,330

1

36

Queens, NY

Jan 11, 2004

#2

• Jan 11, 2004

• #2

That would not be an ideal setup. Youve got to think bigger, which unfortuneately usually means more money

 

tmoss

Gettin Wired

Founding Member

Jun 28, 2001

7,153

32

128

Saint Louis, MO

Jan 11, 2004

#3

• Jan 11, 2004

• #3

Yep, a 347 needs to breath more to work "really well" as you put it. If you put them on a 347 it would work but wouldn't make good power above mid range.

 

90mustangGT

I felt sorry for girls because

Founding Member

Jan 15, 2002

2,773

17

89

Dallas, GA

Jan 11, 2004

#4

• Jan 11, 2004

• #4

It would be a torque monster for sure! It would still make plenty of power, but if your going to spend that on a 347, might as well spend that much for the top end.

 

thumper460

Founding Member

Jul 24, 2000

3,022

2

56

Orange Park , Fl

Jan 12, 2004

#5

• Jan 12, 2004

• #5

Actually there are a few 11 sec N/A 347s on my Ported stock valve size E7s ... but for MORE power ..yes a larger flow numbers will help above 5500 rpm!! cool?? and the low speed velocity will still rock with that stroke!!

Just me............................

Thumper