supercharger and electric fan

[evilwater]

ok so i have a d1 procharger and we got the clutch fan to work but it vibrated really bad so i though about getting an electric fan but the problem im running into is i cant find one slim enough to fit and not hit the 12 rib belt or pulley anyone have any ideas thanks

 

[HISSIN50]

You might want to look at dual fan dimensions from Spal. They package pretty tight.

 

[2000xp8]

Hissin is right, i've seen it done with the d1, and they used two fans, both with shrouds. A little trimming was required then the fans were bolted together in the middle using some aluminum.
It's not going to be cheap.

There's got to be a reason why the stock fan vibrates, broken blades, bad clutch, bent water pump shaft. If the stocker will cool your car properly, it would be far more cost effective to just fix whatever is causing the vibration.

 

[evilwater]

i was reading around and someone said that a 3.8 ford taurus fan would work but not for a procharger if i trimmed it could it work you think

 

[BYRDPE]

the dual contour fans are thinner than the taurus.

 

[evilwater]

o ok cool i didnt know about them. what do they flow for cfm's?