• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

suspension noise

  • Thread starter Thread starter rockyracoon
  • Start date Start date May 10, 2010
R

rockyracoon

10 Year Member
Nov 23, 2005
874
27
49
margate NJ
May 10, 2010
#1
  • May 10, 2010
  • #1
I am getting a knocking noise coming from the front of the car when taking off
from a stop,and also when applying the brakes after first taking off.

its like a knocking/banging noise.

I checked the suspension/steering for excessive play,but there does not seem to be any,calipers are tight.

as stated I dont notice any play when grabbing wheel at 9:00 and 3:00 ,and at 6:00 and 12:00.

im thinking ball joints but I cant tell for sure.
 

GDawg

Founding Member
Mar 22, 2002
1,469
19
68
Nevada
May 10, 2010
#2
  • May 10, 2010
  • #2
Jack your car up (get your wheels off the ground) and try to turn the front wheels from side to side without turning the steering wheel. See if there is play there and how much.
 

patman0911

Founding Member
Jun 5, 2002
2,287
0
46
Tuscaloosa, AL
May 10, 2010
#3
  • May 10, 2010
  • #3
This may sound stupid, but make sure the air filter housing and intake tube isn't flopping around loose - it can bounce around and smack against the hood with changes in acceleration/deceleration if it's not secured like it should be.
 
R

rockyracoon

10 Year Member
Nov 23, 2005
874
27
49
margate NJ
May 10, 2010
#4
  • May 10, 2010
  • #4
GDAWG, Im not seeing any play other than the steering wheel moving,but virtually none to speak of before the steering wheel starts moving.

patman0911, The intake tube and housing seems to be properly attached.

I need to get the car inspected,however I dont want to take it in if there is a chance it will fail.
 

nancygrl

Member
Nov 25, 2009
257
4
18
May 11, 2010
#5
  • May 11, 2010
  • #5
If it's not the ball joints, one of the other things I've read on previous posts, is to check the steering rack bushings. Hope it helps.
 
R

rockyracoon

10 Year Member
Nov 23, 2005
874
27
49
margate NJ
May 11, 2010
#6
  • May 11, 2010
  • #6
thanks ill check the steering shaft.
I dont think the ball joints are bad,however I think the noise is coming from them,possibly they have become dried out.I may try drilling them and adding some grease fittings.
 

rabidscoobie

10 Year Member
Jun 21, 2007
616
12
48
College Station,TX
May 12, 2010
#7
  • May 12, 2010
  • #7
Sounds like motor mounts...my 01 gt did just that when my passenger motor mount completely seperated.It would only make noise on take off/stops or if i really tried to hammer it.

At 1st I thought suspension too,then brakes,then steering..until I jacked the motor up a bit and saw the bad mount.

Worth a look
 
R

rockyracoon

10 Year Member
Nov 23, 2005
874
27
49
margate NJ
May 13, 2010
#8
  • May 13, 2010
  • #8
the mounts are brand new.
 
You must log in or register to reply here.

Similar threads

Fox Suspensión Noise
  • PonyGTrider
  • Nov 24, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
408
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 8, 2026
PonyGTrider
A
Rough idle - cylinder 1 and 6 misfire HELP
  • austindavies935
  • Jul 24, 2025
  • SN95 4.6L Mustang Tech
Replies
12
Views
778
SN95 4.6L Mustang Tech Jul 24, 2025
gkomo
G
Electrical Getting good ground in 1991 Fox Vert for amps - getting popping noise when I turn on the lights?
  • gvanginkel403
  • Apr 11, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
517
Fox 5.0 Mustang Tech Jul 21, 2026
gvanginkel403
G
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
498
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
936
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?