My suspension is really worn out on my 67, it squeaks, rattles, floats, sags etc. I don't have the budget to blow a ton of money on modernizing the current suspension so I'd like to do this on a slimmer budget. My goal for this is just to tighten up the ride, give it some better road holding characteristics make it less wafty, and get rid of the numb feeling it has so that I can drive it around with confidence as I continue to restore it. I probably wouldn't worry about this if I could trailer it around but unfortunately I don't have that ability yet.
So enough rambling, this is what I have on my mind so far:
- Leaf springs
- Shocks all the way around
- Upper ball joints
- Coil springs
- Bushings bushings bushings (so many to list)
The lower control arms are fairly new (< 3 years old)
So thats the basics, what would you add? What are your thoughts?
So enough rambling, this is what I have on my mind so far:
- Leaf springs
- Shocks all the way around
- Upper ball joints
- Coil springs
- Bushings bushings bushings (so many to list)
The lower control arms are fairly new (< 3 years old)
So thats the basics, what would you add? What are your thoughts?