Suspension/steering Help

Do not drop it so far and you will make it a lot easier on yourself.

For 2" you will need CC plates. Also, you may be into the range where you will need special ball joints, etc, etc.

You are getting close to the "replace the whole f'n suspension" zone. Add up what you are spending and then come to your senses...

When you do consider just getting this:



http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=5740

GSTANGT is right about costing $$$, but if you want the 2" drop and you want to do it right then you need:

1. Springs (of course)
2. matched Shocks/struts
3. Taller balljoints (raises the front roll steer back to where it should be)
4. a bumpsteer kit - with this you won't need the offset bushings
5. CC plates - preferably the 4 bolt kind so that you can actually adjust things

the last 3 things are there to correct the suspension geometry. Your mustang already comes from the factory with bad understeer, and if you don't do these things, then you're only going to make the understeering problem much worse.