My buddy had a e303 cam on his shelf and I'm wondering can I put that in my 1988 mustang gt without changing my lifters
Sure can, though depending how many miles are on the engine, you may not want to. New lifters aren't that expensive. The popular answer is that the cam lobes and lifter rollers tend to wear a pattern into one and other over time and this is the reason you shouldn't use them, but this is more of a rule for non roller hydraulic and solid lifters.My buddy had a e303 cam on his shelf and I'm wondering can I put that in my 1988 mustang gt without changing my lifters
When I do cam I was going to do gt40 upper and lower intake . And keep stick headsYou can do that. Just know that there won't be much of a change in performance though. The stock heads and intake system do not flow well enough. Now if you have addressed those issues already...
E cam with stock heads = not worth it. Are you runinng a stick or AOD? I'd suggest looking at the specs and power range on the E cam. I always tell people save the cam swap until you can afford a good set of heads with matched springs.
The springs at this point are more of a variable than the lifters. Definitely have your heads freshened up.I'd probably upgrade/freshen up the springs in the heads as well
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?