t45 to t3650

[tag4car]

shouldn't be any problem bolting onto an 00 gt right? everything i've checked is pointing good

joey

 

[rabidscoobie]

I think it will with a new clutch,diff from a t45 and i think youll need a flywheel,I cant remember if the 3650 has has more teeth on the input shaft.Not sure about the output shaft and driveshaft tho.If you dont get a for sure answer here on the forums try talking to promotionperformance,they seem to really know the stuff.

 

[SVT32VDOHC]

It will bolt right to the motor, and crossmember. The input shafts are both 10 spline. If you look on some websites, they advertise a 10.5" clutch kit for 86-mid 01 Mustang GT's. But that is because they jumped to an 11" clutch in late 01-04. I have an 11" clutch in my 2001 drivetrain that is in my notch and it is still 10 spline. That kit I bought said late 2001 to 04 Mustang GT's. And as you all know the late 01-04 GT's had a 3650, so I believe they are all 10 spline.

 

[ceracer33]

i've done this swap in my 99, everything bolts right up, the only issue u will have is the shifters are different. as long as u have the shifter for the 3650 u will be fine. input and output splines are all the same. very simple swap.

 

[FoxRod87]

What do you have to do if you put a 3650 in a 96-98 GT? The speedo is mechanical. Is it possible?