Does anyone have a template or dimensions for building your own t5 crossmember for a swap into an early mustang (66)? I know this part can be had for $130.00 ~$160.00 through various vendors but could be made by a competent mechanic for alot cheaper. I wanted to have this fabbed BEFOREHAND and not while the trans is "half-installed"while I would be taking measurements and fabricating it then. I didn't see anything in the archives but alot of "banter" about making it during the swap but no actual dimensions or anyone who took the time to actually measure it and make a dimensioned template.I thought I would pose the question to the forum. Brian