Ok, im relocating my wires and vacuum lines into the fender on the passenger side. While doing this, i broke the plate that the TAB/TAD sensor bolt to, and i have mixed the sensors up. They were rusted and broke off the backing plate and i have and no way to know which one is which.
The electrical only goes in one way, but i need to know which vacuum lines to plug into them.
Maybe someone can check for me... the electrical connectors are different. One of the connectors has a blocker on the BOTTOM of the oval (think of the connector as a ford oval) and the other has a blocker on the SIDE. If somebody could check theirs, and let me know which one has the BLACK vac line coming out, and which one has the WHITE vac line coming out, i'd appreciate it.
The electrical only goes in one way, but i need to know which vacuum lines to plug into them.
Maybe someone can check for me... the electrical connectors are different. One of the connectors has a blocker on the BOTTOM of the oval (think of the connector as a ford oval) and the other has a blocker on the SIDE. If somebody could check theirs, and let me know which one has the BLACK vac line coming out, and which one has the WHITE vac line coming out, i'd appreciate it.