• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Tailgaters should be shot; missed 4th went into 2nd.

  • Thread starter Thread starter Rerun
  • Start date Start date May 7, 2004
  • 1
  • 2
Next
1 of 2 Next Last
R

Rerun

Founding Member
Mar 31, 2002
312
0
16
South Bay, California
May 7, 2004
#1
  • May 7, 2004
  • #1
So I'm about to make a left, and this guy is eyeballing me looking into my rearview mirror. Light turns green and he's tailgating me really badly and I really, hate that. So, I drop into second and I'm on it pretty good, get up to about 3500 RPM's and shift into 3rd and this guy is still on my ****ing ass. So, I get on it a little more and around 3000-3500 RPM's in 3rd, I go to drop it into 4th and miss and drop it into second. I look in the rearview to make sure he wasn't going to rearend me and noticed a little bit of white smoke.

I got home, checked the OIL everything looks good no weird particles or white stuff in it. Car temps were normal the rest of the way home, no iradic idles or anything.

Now my question is, what are the potential damages of missing a gear, I didn't let the clutch out easy so it got pretty up there in the RPM's, I didn't really get to see how high as I was concentrating on if he was going to rearend me or not. If I had anywhere else to go I would've just got in another lane and let the guy over.

Thanks in advance,
J.
 

powershift351

New Member
Apr 2, 2004
225
0
0
Carlsbad, Ca.
May 7, 2004
#2
  • May 7, 2004
  • #2
what was he driving? Probably was his brakes locking up
 

Gravel

Member
Mar 17, 2004
216
0
16
Bellingham WA
May 7, 2004
#3
  • May 7, 2004
  • #3
In extream cases you can bend valves, depends on your motor set up.. I have seen belts kick off and things like that. If it still runs right, you probably did nothing... I dont think you have anything to worrie about. If you were driving an M3 you would have towed it straight to a shop...
 
R

Rerun

Founding Member
Mar 31, 2002
312
0
16
South Bay, California
May 7, 2004
#4
  • May 7, 2004
  • #4
powershift351 said:
what was he driving? Probably was his brakes locking up
Click to expand...

SS Camero, he was just being a dick.
 

Icepick

Founding Member
Jul 30, 2002
378
0
0
Ft Lauderdale
May 7, 2004
#5
  • May 7, 2004
  • #5
I dont know how you managed to hit second instead of straight down into fourth but good luck with not having any damage.
 

88stangmangt

Active Member
Nov 25, 2003
2,332
1
48
Stafford,VA
May 7, 2004
#6
  • May 7, 2004
  • #6
tire's lock up?
 

TT91

Active Member
May 23, 2003
1,536
0
36
Paramus, NJ
May 7, 2004
#7
  • May 7, 2004
  • #7
no worries, i used to do that on purpose to lock my rear tires up..its pretty fun when done right, your shouldnt have damaged anything.
 
8

88mustangGT

New Member
Apr 6, 2003
298
0
0
May 7, 2004
#8
  • May 7, 2004
  • #8
ya my vote would be tire smoke, sometimes under hard braking and downshifting at the same time the back tires will brake free. i bet you just broke them free.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,259
17,943
224
Massachusetts
May 7, 2004
#9
  • May 7, 2004
  • #9
On the T-5 i just rebuilt, previous owner did the same thing. Except he missed the POWERSHIFT from 3rd to 4th and hit 2nd.

After that second would always grind. He tore up the dog teeth on 2nd gear and the 1-2 synchro pretty good.
 

cjman15

Banned
Apr 15, 2004
1,009
0
0
Fairfield, PA
May 7, 2004
#10
  • May 7, 2004
  • #10
that stinks... have you ever seen that video online of this guy driving an integra and he goes to powershift from 3rd to 4th and he hits 2nd and spins his car out and wrecks...? hahaha it's tha funniest thing
 

Mavrick

Founding Member
Aug 29, 2002
2,264
0
46
Collingwood, ON
May 7, 2004
#11
  • May 7, 2004
  • #11
cjman15 said:
that stinks... have you ever seen that video online of this guy driving an integra and he goes to powershift from 3rd to 4th and he hits 2nd and spins his car out and wrecks...? hahaha it's tha funniest thing
Click to expand...

haha. I've seen that i think, the black integra, black wheels, guy is asain of some sort? Funny..
 

axeman

Founding Member
Feb 9, 2001
1,348
0
36
Elizabethtown, PA
May 7, 2004
#12
  • May 7, 2004
  • #12
i hate tailgaters! i usually just slow down and piss them off more. except one time i was just fed up, so i dropped her down and took off. next thing i know, there's light coming my way. i ended losing my license for 2 weeks because i was going 34 mph over the speed limit. that was 3 years ago though, so atleast that's off my record now. live and learn. next time just slow to a creap and beleive me, i've done that before. 5 or 10 mph in a 40 really pisses them off!
 
D

Demented4.6

Founding Member
Mar 14, 2001
1,055
1
38
DAYTON, OHIO
May 7, 2004
#13
  • May 7, 2004
  • #13
last azzhole tailgater i had bought ate my rearend... I was going about 10 over and he is on my rear bad. just about close enought i couldn't see his headlights. so as i am cruising in 4th i push the clutch in as i come to a light thats about to turn red, he thinks i am going to gun it but instead i slipped it into second and dumped the clutch. got the rear tires to break loose and he about ate it.. gotta love 5 spds!! then when the light turned green i sat roasting my tires just to fill his car full of smoke and his front full of rubber
 

mustang88GT

New Member
Jun 1, 2003
186
0
0
Charlotte, North Carolina
May 7, 2004
#14
  • May 7, 2004
  • #14
i used to down shift in to second inmy old 4beater stang so my wheels will lock up and back end kick out a lil coming down an off ramp... this was eventually between that and alot of other abuse the clutch went..lol
 
8

87'GTstang

New Member
Feb 16, 2004
1,025
0
0
May 7, 2004
#15
  • May 7, 2004
  • #15
I usually go as slow as I can go to piss them off even more. The only other thing that pisses me off more are those that honk their horn after the light has been green for a 1/2 second. Easy fix for that too, just sit there and when it turns yellow, floor it - revenge is sweet sometimes, expecially when you can walk away being the calm one and the other person fretting over it.
 

mustang88GT

New Member
Jun 1, 2003
186
0
0
Charlotte, North Carolina
May 7, 2004
#16
  • May 7, 2004
  • #16
one more thing how do yall manage to miss 4th??? with my tri ax i think you would have to try to even miss 3rd... since i have bought my tri-ax never missed a shift but abuse will catch up to u even though u dont miss gears...that lead to blowin 3rd to pieces
 

90_Red_LX

Member
Sep 29, 2003
668
5
19
Asheboro, NC
May 7, 2004
#17
  • May 7, 2004
  • #17
axeman said:
i hate tailgaters! i usually just slow down and piss them off more. except one time i was just fed up, so i dropped her down and took off. next thing i know, there's light coming my way. i ended losing my license for 2 weeks because i was going 34 mph over the speed limit. that was 3 years ago though, so atleast that's off my record now. live and learn. next time just slow to a creap and beleive me, i've done that before. 5 or 10 mph in a 40 really pisses them off!
Click to expand...


Thats what I do lol. Tailgater, slow down. I stab my brakes, and make it semi-unpredictable, but not to the point of accidents (unless their stupid). What I also like to do is approaching a stoplight is slow down REEEALLL SLOW, make my right turn just as the light turns and make them idiots have to wait. lol
 

two_stangs

New Member
Jan 3, 2004
61
0
0
AZ
May 7, 2004
#18
  • May 7, 2004
  • #18
Icepick said:
I dont know how you managed to hit second instead of straight down into fourth but good luck with not having any damage.
Click to expand...


I don't know how to miss a gear either.......BUT..!

My Freind just did that same thing in his built H22 Honda motor Racing a Vette and totaly tore up his engine. Clutch and Flywheel shot. Car still Starts but can't engage. Tranny has to be toast. We will be putting a new clutch and fywheel in and checking a few things then starting it up and try to drive it and see what else it damaged.

But granted he was at 8,500 RPMs shifting from 3rd to 2nd. You case is not that extreme so I would not worry too much. You can just grind the gears a little. I would change the Transmission Fluid and see it any metal comes out. Other than that in the RPMs you were in on a Ford Motor Should not do anything...You probebly didn't hit higher than 5500 when you engaged from 3500 to 2nd. I've taken mine up to 6500.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
May 7, 2004
#19
  • May 7, 2004
  • #19
"If you were driving an M3 you would have towed it straight to a shop... "

If he was driving an M3 - he wouldn't have mistaken 2nd for 4th.
 

Js90Lx

Founding Member
Jul 25, 2000
1,124
0
0
Athens, GA
May 7, 2004
#20
  • May 7, 2004
  • #20
My friend blew his h22a prelude up missing 4th going to second. Was teaching my sister how to drive my 5spd accord and she downshifted from 4th to 1st
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Engine Light throttle miss
  • Dontknowchit
  • Jul 7, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
179
Fox 5.0 Mustang Tech Jul 7, 2025
AeroCoupe
W
Megasquirt base tune for 94 5.0
  • wrx757
  • Mar 6, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
214
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 6, 2026
wrx757
W
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
724
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
R
Drivetrain Clutch
  • Robman8028
  • Jun 29, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
272
Fox 5.0 Mustang Tech Jul 2, 2025
AeroCoupe
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
393
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?