Taking off the spoiler..

nsane04gt · Feb 8, 2009

Are there steps to taking the spoiler off? If so please let me know, thanks.

Night Shifter · Feb 8, 2009

nsane04gt said:
Are there steps to taking the spoiler off? If so please let me know, thanks.

Posted via Mobile Device open trunk..undo the 4 bolts holding spoiler on.. take off spoiler

jlds91389 · Feb 8, 2009

^like he said i went to auto zone and bought some little black panal fastners and put that in the four holes

Silverstang02GT · Feb 8, 2009

Intel I had mine filled and painted I did the same thing. got mine from home depot. I don't remember the size plugs I used but I do remember it was 2 different sizes for my car (2002 GT). I also used a little silicone on the back side to make sure they did not leak.

ItsStock02 · Feb 8, 2009

01-04 uses two 5/16" and two 3/8".

Heres my thread where I painted the nylon plugs. Its only temporary till I get it done professionally.

SilverMustangs.com • View topic - Going spoiler-less

joshjwc9 · Feb 8, 2009

So the 99 and 2000 plugs will be different sizes? I am thinking about either taking off the spoiler on my vert or moving it back, anyways I would want to throw some plugs on there so the trunklid doesnt leak at all.

evil281 · Feb 8, 2009

just move it back. its better than the plugs i think

BlownStangGT · Feb 8, 2009

joshjwc9 said:
So the 99 and 2000 plugs will be different sizes? I am thinking about either taking off the spoiler on my vert or moving it back, anyways I would want to throw some plugs on there so the trunklid doesnt leak at all.

On my 2000 there was 3 holes on each side when I took off the spoiler. 2 were for the mounting bolts/nuts and the one was for the alignment dowel or whatever you want to call it. So if you move it back, you can use the alignment hole for the 1 bolt and only drill 1 new hole. Hope that makes sense.......BUT if you get plugs, you will need 6 plugs, not 4 like the 01+ CARS

joshjwc9 · Feb 8, 2009

BlownStangGT said:
On my 2000 there was 3 holes on each side when I took off the spoiler. 2 were for the mounting bolts/nuts and the one was for the alignment dowel or whatever you want to call it. So if you move it back, you can use the alignment hole for the 1 bolt and only drill 1 new hole. Hope that makes sense.......BUT if you get plugs, you will need 6 plugs, not 4 like the 01+ CARS

Do you know what size the holes are?

BlownStangGT · Feb 8, 2009

joshjwc9 said:
Do you know what size the holes are?

TO be honest I forget. I might still have the plugs in my tool box, I will have to check. Pretty sure I through them out. But I will check. I almost want to say its the two sizes that were mentioned and I forget what the dowel or allignment hole is

isjoining · Feb 8, 2009

joshjwc9 said:
Do you know what size the holes are?

1/2" and 3/8"

joshjwc9 · Feb 8, 2009

I think I may run to the auto parts store on my way home from work tomorrow! Thanks BlownStangGT and isjoining!

Taking off the spoiler..

nsane04gt

New Member

Night Shifter

Well-Known Member

jlds91389

New Member

Silverstang02GT

New Member

ItsStock02

Member

joshjwc9

Active Member

evil281

New Member

BlownStangGT

REPEAT

joshjwc9

Active Member

BlownStangGT

REPEAT

isjoining

New Member

joshjwc9

Active Member

Similar threads

Taking off the spoiler..

New Member

Well-Known Member

New Member

New Member

Member

Active Member

New Member

REPEAT

Active Member

REPEAT

New Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency