TFI bolts.....help!

jmd2914 · May 24, 2005

ok i got a new tfi module for my car, finally, and im trying to get the old one out but every socket i try is either too big to fit in the hole or too small to fit over the bolt. ive tryed all the 1/4 drive sockets that i have and none of them work i even went down and bought two more sets. does anyone have any idea how to get these out? or what sizet he bolts are? i really want to start driving my car again, so if anyone has any input please let me know. thanks,
Joel

Jason 302 · May 24, 2005

Advance Auto parts carrys the tool specifically for that. It's in the HELP!/tool section and is around $4 I believe.

jmd2914 · May 24, 2005

any other place besides advanced that you know of? cuz i dont think we have one of those where i live, unfortunatly.

stang22 · May 24, 2005

Buying the tool is the right way to do it, but if you have a spare 5.5mm or 7/32" socket, you can grind it down enough to make the socket reach. It doesn't take much to make it work.

Tim

slow93 · May 24, 2005

Jason 302 said:
Advance Auto parts carrys the tool specifically for that. It's in the HELP!/tool section and is around $4 I believe.

autozone and orielly's

JB66 · May 24, 2005

Sears Craftsman 7/32 deep six point 1/4" drive works also.

Rick 91GT · May 24, 2005

NAPA has them as well..

jerryD · May 24, 2005

any parts store should have the tool. but the correct size is a 7/32 deep well thinwall.

jmd2914 · May 24, 2005

thanks for all the help guys, ill tell you how it goes

Curse · May 24, 2005

Good luck

TFI bolts.....help!

jmd2914

Jason 302

jmd2914

stang22

Active Member

slow93

New Member

JB66

New Member

Rick 91GT

Mustang Master

jerryD

jmd2914

Curse

Member

Similar threads

TFI bolts.....help!

Active Member

New Member

New Member

Mustang Master

Member

Similar threads

Privacy & Transparency

Privacy & Transparency