• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

This makes no sense at all. PLease help

  • Thread starter Thread starter stooges701
  • Start date Start date Feb 12, 2006
S

stooges701

New Member
Oct 27, 2005
36
0
0
MO
Feb 12, 2006
#1
  • Feb 12, 2006
  • #1
Ok first off this is what I got
1992 mutang gt
306
Afr 165 heads
Tubular gt-40 intake
Ander son for n-21 cam
30ld fuel injectors
75mm throttle body and egr spacer
75mm mass air calibrated for 30 lb fuel injectors
190 in tank fuel pump
anderson for power pipe

Ok heres whats going on, I just got my car running a little over a week ago and have 400 miles on the motor. To get the car to run and start nicely, I have the fuel pressure at 25 with the vacumm off.{ that seems really low}. Now For the other wierd thing I have the timing set at 22 base timing with pip out thats 42 total advanced. That seems like at alot to me. I cant seem to get the plugs to show me any sign of lean or richness. Also when it first starts it stumbles like it missing and the idle is always surging. I think mybe the plugs arent changing becouse the heads are making the fuel burn so good.What do you think about the fule pressure and the timing? Also what do think about the surging and the stumbling?
 
L

luckythirteen13

New Member
Jul 19, 2005
648
0
0
Anaheim, CA
Feb 12, 2006
#2
  • Feb 12, 2006
  • #2
fuel pressure should be 41-42psi vac off. start your base timing at 10* and work from there. 22* base is way too much
 
S

stooges701

New Member
Oct 27, 2005
36
0
0
MO
Feb 12, 2006
#3
  • Feb 12, 2006
  • #3
I know were to start but the setting that I Have it at makes it run deccent but i know thier not right. When the fp is at 45 it hardly starts and also it runs like ****.Timing at 10 degrees it also runs like ****? Iam confused.

Also.. My car isn't any faster than it was with the stock heads and other cam. I installed my cam at 109* when it was recommended to be installed at 106*. Could this be my problem?
 
You must log in or register to reply here.

Similar threads

B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
526
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
405
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
487
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
9
1995 5.0 just cranks
  • 9GT5
  • Jun 29, 2025
  • 1994 - 1995 Specific Tech
Replies
1
Views
436
1994 - 1995 Specific Tech Jun 29, 2025
AeroCoupe
F
Trouble Shooting Sudden Shift of AFR at low RPM
  • Farva_84
  • Jun 6, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
639
SN95 4.6L Mustang Tech Jun 8, 2025
Farva_84
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?