• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-

Thoughts/experience with BamaChips XCalibrator?

  • Thread starter Thread starter bluecar
  • Start date Start date Apr 26, 2008
B

bluecar

Member
Feb 19, 2007
99
0
6
SF CA
Apr 26, 2008
#1
  • Apr 26, 2008
  • #1
I'd like to solicit any opinions and experiences with the XCalibrator. Comments will be sincerely appreciated.

KL
 

JOEGTS

New Member
Jul 23, 2005
153
0
0
Port Saint Lucie, FL
Apr 27, 2008
#2
  • Apr 27, 2008
  • #2
I purchased an X3 from Bamachips and was very satisfied!
 

DarkFireGT

Playing with my wife's really makes me want one.
10 Year Member
May 23, 2004
692
10
89
East Moline, IL
Apr 27, 2008
#3
  • Apr 27, 2008
  • #3
I started with Bamachips and ended up with Brenspeed. His tunes just didn't seem to be compatible with my cars, and at the time, he was quite slow at replying to emails. He's a stand-up guy, though, and most people have had great results with his tunes.
 

highvolts

20+ Year Stangneter
Sep 1, 2003
436
2
18
Ohio
Apr 27, 2008
#4
  • Apr 27, 2008
  • #4
DarkFireGT said:
I started with Bamachips and ended up with Brenspeed. His tunes just didn't seem to be compatible with my cars, and at the time, he was quite slow at replying to emails. He's a stand-up guy, though, and most people have had great results with his tunes.
Click to expand...

I'm also in the same market and its down to Brenspeed and Bamachips. But to second DF's comment, I haven't even ordered from Bama yet and he is slow at replying to emails. I'm sure that he is busy and I'm in no hurry. However, I'm going to start emailing Brenspeed also.
 

'06 stang

New Member
Jun 3, 2005
43
0
0
Ky
Apr 27, 2008
#5
  • Apr 27, 2008
  • #5
I have Dougs tunes and Brenspeeds mufflers. I have had nuttin but good customer service from both.
 
R

ranger04

New Member
Jul 28, 2007
245
0
0
Apr 28, 2008
#6
  • Apr 28, 2008
  • #6
Doug at bama is a ford guru, he knows fords and how to make them run. He's highly respected across the country for his tunes. I had bama on my 04 ranger 4.0, it was good for 14 hp at the wheels and 20 foot pounds.
 
B

bluecar

Member
Feb 19, 2007
99
0
6
SF CA
Apr 28, 2008
#7
  • Apr 28, 2008
  • #7
Thanks all. The Bama website was very informative and explained things in terms I could understand. I did lob him an email and its yet to be answered but appeared knowledgeable.
 
R

ranger04

New Member
Jul 28, 2007
245
0
0
Apr 29, 2008
#8
  • Apr 29, 2008
  • #8
Sometimes the e-mails take awhile as he is very busy this time of year as it's drag race season and he personally answers them.
 
A

Alliance

New Member
Oct 31, 2006
0
0
0
Apr 29, 2008
#9
  • Apr 29, 2008
  • #9
bluecar said:
I'd like to solicit any opinions and experiences with the XCalibrator. Comments will be sincerely appreciated.

KL
Click to expand...

I noticed in your sig that you have an auto trans. If you are looking for a tune that truly does your auto justice, then Doug at Bama is the man! I got an X3 from him for my 2006 GT auto and I LOVE it. My car stock ran 14.00 - 13.90 @99 mph and with just Doug's tune I run consistant 13.3s @105 mph. The torque management tweaks he does make such a HUGE difference, not to mention the throttle response.

He can be a little slow on email response, but to me it's worth it for the gain I got.
 
B

bluecar

Member
Feb 19, 2007
99
0
6
SF CA
May 3, 2008
#10
  • May 3, 2008
  • #10
I ordered one yesterday!

I asked for mild tunes: 87 performance, 89 performance, 89 torque. Octane only goes up to 91 here.

I did notice he paid a lot of attention to the automatics so yes, that was one of the reasons I am buying from him.

He return email showed a lot of thought and concern. Douglas told me he could set the tune so the OD does not kick in till 55mph. He also asked me to voice some of my concerns on how the car behaved so he could do the tune accordingly. I told him (in addition to the throttle lag) that the car upshifted too quickly and when driving 25-30 mph in the city, the car seemed to be in a higher gear than it should be, also when I give it some gas, the engine gets louder, and doesn't want to downshift.

Also, stoopid me. I couldn't find the PCM and I gave him every alphanumeric I could find off of the fusebox. He gave me a kind reply..... something like Kevin you're looking at the fusebox and not the PCM. He then attached a picture of the PCM with the code sticker circled in yellow with a arrow pointing to it.

At this point, I don't think I could go wrong with Bama.
 

Maza4ever14

New Member
Apr 27, 2005
187
0
0
Bay Area, CA
May 3, 2008
#11
  • May 3, 2008
  • #11
i went with bamachips and i was happy with the results.

I wanna try out brenspeed for shats and giggles.

Where in SF are you?
 
B

bluecar

Member
Feb 19, 2007
99
0
6
SF CA
May 3, 2008
#12
  • May 3, 2008
  • #12
Mission Dolores - one block from the park and one block from MD San Francisco de Assisis.
 

walter

Founding Member
Aug 13, 1998
1,054
0
46
Houston TX
May 4, 2008
#13
  • May 4, 2008
  • #13
I went with Doug and he was really cool. Called me on my Cell phone to make sure everything was there. I got a bit unlucky because I bought my combo during the switch from Xcal2 to Xcal3 and at the time he was not comfortable with shipping out the X3 until all the bugs had been worked out but he asked me anyways so I went with a recommendation and got a free painted to match JLTII option so I was happy. The man is basically a one man band so that's why his e-mails are slow to come by. About his tune, my 93 race had some issues at first it was pinging a little past 4K RPM. Fuel quality and other local variables were probably responsible so I e-mailed him and in the reply he sent me a revised tune with a little less timing past 4K which fixed the problem at no charge.

I got nothing but good things to say about Bamachips.
 
You must log in or register to reply here.

Similar threads

Flop top talk
  • unknlgnd
  • Nov 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
120
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 1, 2025
unknlgnd
T
Service Fluid Recommendations for 2015 Paxton Supercharged GT
  • ThotTrap
  • Aug 25, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
0
Views
117
2015 - 2023 (S550) Mustang -General/Talk Aug 25, 2025
ThotTrap
T
M
Inheriting (and likely restoration of) a 1965 Mustang
  • miniwheats235
  • Feb 17, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
225
1965 - 1973 Classic Mustangs -General/Talk- Feb 19, 2026
Realmongo
M
Engine 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
497
Fox 5.0 Mustang Tech Nov 28, 2025
Mustang5L5
S
Need help asap
  • shaggyman65
  • Dec 24, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
242
1996 - 2004 SN95 Mustang -General/Talk- Dec 24, 2025
shaggyman65
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?