• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Thread sealer Question

  • Thread starter Thread starter bifs66
  • Start date Start date Oct 15, 2007
B

bifs66

Founding Member
May 1, 2000
146
0
0
Oct 15, 2007
#1
  • Oct 15, 2007
  • #1
There are many types of thread lockers and sealers out there; but which one is recommended to seal the flywheel bolt threads and give correct torque readings? Most instructions say to "seal" the threads; but don't give a specific product number. Also, manuals generally say to use new flywheel bolts. I had installed ARP flywheel bolts about 3K miles ago and wonder if they should be replaced. Sometimes, the simple questions are the most bothersome.
Any input is appreciated.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Oct 15, 2007
#2
  • Oct 15, 2007
  • #2
It's no bother. You should know though, that thread 'sealer' and thread 'lock' or 'locker' are two different things.

Get a thread sealer that is designed to withstand oil and gas. This sealer will be different than what you might use on the long head bolts to seal against engine coolant.

As far as replacement of the bolts go, my question is, "Why"?

3000 miles for a set of flywheel bolts is nothing! OEM bolts can last over a 100,000 miles (proven thousands of times over). ARP bolts... I doubt you will ever have to replace them unless you loose or damage one. They will outlive you.
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
J
Hello all, I have returned from a hiatus... Update and Questions
  • JackH
  • Aug 13, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
6
Views
464
1974 - 1978 Mustang II Talk & Tech Aug 15, 2025
JackH
J
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
619
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
New Products From J&M Products - 1979-1998 & 1999-2004 Race/Extreme Duty Rear Lower Control Arms
  • J&M Products
  • Oct 9, 2025
  • Vendor Sponsor Forums
Replies
0
Views
474
Vendor Sponsor Forums Oct 9, 2025
J&M Products
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?