like to know which throttle body to go with and what size, Also underdrive pulleys, I live in the desert, and was wondering if my car would run at a high temp and/or cause and problems, dont see a supercharger anytime soon,
thanks
here's a link with some good info for throttle body size and plenum combo. personally, im going with an accufab plenum and 70mm throttle body. since you dont plan on supercharging, i'd say 70mm http://www.accufabracing.com/mustang_gt.htm
here's another link with some dyno sheets comparing different throttle bodies and plenums on a few differently modded cars.http://www.cnlperformance.com/plenum.html
It also measures less than 70mm.
Go with the best - Accufab, but be sure to team it up with an aftermarket plenum for decent results. Some reported a loss down low with the 75mm TB, so I went with the 70mm...and I have no regrets.
without a blower in the future, I'd go w/a 70 MM TB, but keep in mind you probably wont see/feel a gain unless you match it up w/a good plenum and maybe a CAI, and a tune. Pulleys are a good idea, too, but you might also consider a lower opening temp thermostat to make up for the cooling differences you will see when you add the pulleys in the desert heat