Thypoon Intake Manifold

GTconvertable · May 21, 2006

hey man i just want to get my car done back off. I just dont want to pay 1200 for a intake when all im wanting is to have something stronger thats it just something stronger. now I dont know much about professional products I just know they have a reasonable intake manifold out their that is alumunum and I want it. please get off my back. thank you

GTconvertable · May 21, 2006

you crack me up..lol do I work for them.. its a conspericy..watch out for professional products they have salesmen on internet forums.

DropTopPony · May 21, 2006

GTconvertable said:
you crack me up..lol do I work for them.. its a conspericy..watch out for professional products they have salesmen on internet forums.

Hey i would do it if i was them! They don't exactly have a good reputation with the reverse engineered products they currently have out.

If you'd like another alternative that is made in the USA look at
http://www.hiperformancesolutions.com/index2.html

helty · May 21, 2006

just wait for the edelbrock to come out. Probably wont gain a damn thing, but its aluminum, made in the USA, and comes from a reputable company.

Alfredo E · May 21, 2006

Ok, ok. Thanks a lot for your answers.

I'm looking for a stonger manifold (I have the all-plastic...), with 2 water temp sensors connectors.
Hp gain isn't the first reason to change, but if i can gain some...

I asked for Typhoon because I saw it at 50Resto site.

Edelbrock build an aftermarket intake manifold?

Thanks again
Alfredo

DCjuggalo · May 26, 2006

where are the typhoon intakes being manufactured?

myponyrocks · May 26, 2006

probly Korea or China

XtorT'r · May 26, 2006

DropTopPony said:
Hey i would do it if i was them! They don't exactly have a good reputation with the reverse engineered products they currently have out.

If you'd like another alternative that is made in the USA look at
http://www.hiperformancesolutions.com/index2.html

wow thats a nice peice, I might have to add that to my cams fund. Not that expensive either.

CatmanJJ · May 26, 2006

Nice, it's about time some intakes start coming to the market.

Pennywise2 · May 26, 2006

DCjuggalo said:
where are the typhoon intakes being manufactured?

Try China!

speedfreak98r · May 26, 2006

Pennywise2 said:
Try China!

Wherever they have typhoons

Yellow2002GT · May 26, 2006

As far as gains go...rick at anderson ford told me not to get it at first because of the rev range.....after I told him I was running my car to 6100 he said it would benefit at that rpm range......but if your car is set to 5800 rev limiter I don't think a 3-4 rwhp increase is worth the money......I have been spinning my motor to 6100 rpms since new and never had bearing problems....anything higher then you need a build bottom end. So If your a drag racer or like to rev it a bit...13-17 hp is alot on top end.....especially for and aode equiped car and looking for a higher shift point! Just my 2 cents.....

"ED"

hotmustang331 · May 26, 2006

^ iv been spinning mine to 6200+ for 20K...0 issues. I have hit the 6500 limiter a few times, and wound it out to 6400 a few times....even in 4th . LOL

I would like to get the HPS, but i dont want to let go of that kind of money, especially since its not really proven yet. Im not staying 2V forever...but had it been $600 then I probably would have got it.

1BADAOD · May 26, 2006

Don't forget C&L has a lower coming also.

DropTopPony · May 26, 2006

1BADAOD said:
Don't forget C&L has a lower coming also.

Wow flashback to 2003....and i guess BBK is still working on theirs....anyday now huh....i wouldn't hold my breath for a quality 2V intake

Pennywise2 · May 26, 2006

DropTopPony said:
Wow flashback to 2003....and i guess BBK is still working on theirs....anyday now huh....i wouldn't hold my breath for a quality 2V intake

That will be the day when someone makes a quality
intake manifold for are cars...

mineralgraygt · May 27, 2006

i just read something about mustang and ff doing a test on both bbk's and the typhoon in the next month or two. it was in the recent issue

myponyrocks · May 27, 2006

hmmmm guess I may have to hold out on the HPS if C&L is making one... BBK isn't bad either (assuming the quality is like thier headers, good bends, and sloppy easy to clean up weld splatters)

Mike97gt · May 28, 2006

GTconvertable said:
no **** thanks though

you might want a admin to fix your name for you. that way you don't get crap about your spelling error.

myponyrocks · May 28, 2006

ever think he spelled it wrong because the correct spelling was aken allready?

Thypoon Intake Manifold

New Member

New Member

Noob Slayer

some Ukrainian's enjoying a handjob via my credit

New Member

Member

I have more billet on the Stang than most women ha

New Member

Captain Tangnet

Banned

Banned

New Member

Active Member

New Member

Noob Slayer

Banned

Member

I have more billet on the Stang than most women ha

it doe snot

I have more billet on the Stang than most women ha

Similar threads

Privacy & Transparency

Privacy & Transparency