• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Tick sound from engine between 2000-3000rpm under accel?

  • Thread starter Thread starter 85GTKid
  • Start date Start date Nov 14, 2004

85GTKid

Founding Member
Jun 6, 2001
511
0
16
Oregon
Nov 14, 2004
#1
  • Nov 14, 2004
  • #1
Well when i accel usually from 2000 to 3000 rpms i hear a ticking or rattling sound from the engine bay that i dont hear at any other times. I know i have a bad header leak on the passenger side but is it possible that i only hear it in the car under the cirumstances mentioned above?
 
M

mackey

Active Member
Jan 25, 2003
1,284
1
38
Beverly, Massachusetts
Nov 14, 2004
#2
  • Nov 14, 2004
  • #2
Welcome to my life. As the weather gets colder it gets worse? Such as the rpms tend to drop down even more. Hopefully someone can shed some light on this and help us. My car is off the road for the winter...
 

jb89coupe

New Member
Sep 3, 2004
416
0
0
CT
Nov 14, 2004
#3
  • Nov 14, 2004
  • #3
Sounds like pinging to me... you can pretty much rule out an exhaust leak by putting it in 4th and flooring it around 1500-2000rpm. If your sound doesn't get WAY louder than you should be looking for something else. What mods are done to your car, you could be leaning out in that rpm range. Mine used to do the same thing before I got an AFPR and upped my fuel pressure a bit. What's your timing set at? Octane?
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Nov 14, 2004
#4
  • Nov 14, 2004
  • #4
Header leaks can be quite tricky. Depending on how hot the headers are and such. You are going to have to fix the header leak eventually anyway so might as well start out with that so you can rule it out.
 

85GTKid

Founding Member
Jun 6, 2001
511
0
16
Oregon
Nov 14, 2004
#5
  • Nov 14, 2004
  • #5
600 cfm edelbrock carb. performer intake, e7 heads that might be ported, full exhaust. Elec fuel pump (ex cfi car) regulated to 6.5 psi. Timing was at 14 but i dropped it to 10 with little to no diff. After fixing the header should i try premium? i ususally run mid right now.
 
You must log in or register to reply here.

Similar threads

2
Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
260
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
2000ElectricGreen
2
B
90Gt squeal/chirp when hot
  • Bvoss59
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
664
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 14, 2025
General karthief
A
95 Gt intermittent backfire
  • A_A_Ron
  • May 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
420
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 26, 2025
A_A_Ron
A
A
Resolved 03 GT Parasitic Draw Fuse 26 (PCM)
  • Antrix
  • Mar 22, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
693
SN95 4.6L Mustang Tech Mar 24, 2025
89ripper
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
572
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?