Recently we released our 94-98 (& 99-04) Mustang GT Upholstery line, which has one of the most detailed installations of any of our products. TMI recently made the decision to hire someone in full time to both write and film installation walk-throughs for our products. Now you will be able to watch/review an instruction sheet or video before you make the decision & commitment to purchase a product.
The PDF walk-through linked above is for the 94-98 Mustang Replacement Seat Upholstery. Originally, Ford injected the foam for these seats directly into the upholstery – permanently adhering the two. Ford only did this for these 5 years before they switched back to the foam and the upholstery being two totally different entities , as they had done up till that point and as they continued to do after 1998. In order to reproduce the upholstery for this year of Mustang, we decided to do what Ford maybe should have done – and separated the front bucket foam from the upholstery once again. The attached guide will walk each person through everything - from which tools they’ll need, to a step by step detailed and photographed instructional guide on how to install the covers. (please note: TMI Bucket Upholstery MUST be used in conjunction with TMI Front Bucket foam for the 94-98 Mustang – you cannot reuse your original foam or upholstery due to the old foam being ruined as you remove it, and the new TMI foam obviously has to have different attachment methods than the original).
I really hope this helps answer any questions out there - as well as gives you a better scope of the installation process for these years of Mustang. Please let me know if anyone has ANY questions!
94-98 Mustang Front Buckets
http://www.tmiproducts.com/installation/1994-98%20Mustang%20Front%20Bucket%20Upholstery%20Kit_99-6604-000.pdf
94-98 Mustang Coupe Full Set
94-98 Mustang Convertible Full Set
The PDF walk-through linked above is for the 94-98 Mustang Replacement Seat Upholstery. Originally, Ford injected the foam for these seats directly into the upholstery – permanently adhering the two. Ford only did this for these 5 years before they switched back to the foam and the upholstery being two totally different entities , as they had done up till that point and as they continued to do after 1998. In order to reproduce the upholstery for this year of Mustang, we decided to do what Ford maybe should have done – and separated the front bucket foam from the upholstery once again. The attached guide will walk each person through everything - from which tools they’ll need, to a step by step detailed and photographed instructional guide on how to install the covers. (please note: TMI Bucket Upholstery MUST be used in conjunction with TMI Front Bucket foam for the 94-98 Mustang – you cannot reuse your original foam or upholstery due to the old foam being ruined as you remove it, and the new TMI foam obviously has to have different attachment methods than the original).
I really hope this helps answer any questions out there - as well as gives you a better scope of the installation process for these years of Mustang. Please let me know if anyone has ANY questions!
94-98 Mustang Front Buckets
http://www.tmiproducts.com/installation/1994-98%20Mustang%20Front%20Bucket%20Upholstery%20Kit_99-6604-000.pdf
94-98 Mustang Coupe Full Set
94-98 Mustang Convertible Full Set