• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

TOB retainer replacement.

  • Thread starter Thread starter Look Its Aaron
  • Start date Start date Jan 24, 2006

Look Its Aaron

Your car looks like it came straight from Mexico.
Founding Member
Nov 18, 2001
2,634
0
48
Fontana, Cali
Jan 24, 2006
#1
  • Jan 24, 2006
  • #1
My TOB went dry and is seizing. I am going to drop the trans and I already bought the steel replacement retainer.
Any special tricks on how to replace this? or is it jsut remove the bolts and replace?
 
J

jerryD

Founding Member
Mar 16, 2000
1,061
0
37
Gladstone, MO
Jan 24, 2006
#2
  • Jan 24, 2006
  • #2
be sure to put a little bit of grease on the inside of the TOB and some on the input shaft of the tranny.
 
M

Mike92GT

Founding Member
Jan 23, 2002
583
0
0
Florida
Jan 24, 2006
#3
  • Jan 24, 2006
  • #3
There is a thin shim behind bearing race that fits inside the retainer. Make sure you re-install the shim when you transfer the bearing race over to the new retainer. It's very easy to miss.
 

Euphoric306

New Member
Apr 5, 2004
905
0
0
Jan 25, 2006
#4
  • Jan 25, 2006
  • #4
 

Look Its Aaron

Your car looks like it came straight from Mexico.
Founding Member
Nov 18, 2001
2,634
0
48
Fontana, Cali
Jan 25, 2006
#5
  • Jan 25, 2006
  • #5
thanks.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 25, 2006
#6
  • Jan 25, 2006
  • #6
Make sure to check endplay and shim appropriately.

And dont dump the input shaft/needle bearings.
 
V

v8only

Active Member
Jul 3, 2003
2,378
22
49
Jan 25, 2006
#7
  • Jan 25, 2006
  • #7
use silicone on the mating surface, no gasket.
 
You must log in or register to reply here.

Similar threads

L
Electrical problems with passenger side downstream o2 sensor
  • Lexiii12
  • Sep 14, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
0
Views
160
2005 - 2014 S-197 Mustang -General/Talk- Sep 14, 2026
Lexiii12
L
D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
207
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
T
Engine Removal of Steeda Underdrive pulley
  • THughes
  • Jun 30, 2026
  • 2005 - 2009 Specific Tech
Replies
1
Views
178
2005 - 2009 Specific Tech Jul 4, 2026
Dino Dino Bambino
M
85 mustang 5.0 cranking in run position
  • Mamaclean
  • May 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
263
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2026
General karthief
W
Electrical 91 GT Alternator Replacement Question
  • willrh111
  • Oct 22, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
508
Fox 5.0 Mustang Tech Oct 23, 2025
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?