Took off the slack

Guero

Active Member
Oct 11, 2005
2,148
0
47
off the accelarater, and honestly its better than the short shifter. Just feels alot better. i mean like i should of done that first then the shifter.just thought id say that.
 
Kyle, the pedal has some slack in the cable from the factory to keep the throttle cable from stretching under WOT. It's an easy mod to take out the slack, feels like you gained 50hp (in reality you gained 0), and the risk of stretching the cable is very low.

Guero, glad to hear you like it! I couldn't believe the difference (SOTP-wise, which we all know is inaccurate, but who cares?! :banana: ) it made when I did mine many moons ago.
 
if you can pull the accelarater forward, that my friend is called slack.i put an 1 inch spacer and its lined up with the brake if not a little farther up and it does feel like you gained 50 hp
 
I did this a few months ago as well. My cable seemed a little too long allowing the pedal to hit the floor before the throttle body blade was fully opened. I used a piece of 3/4" hardened nylon tubing as the spacer. The pedal sits @ a much better height IMO.
 
how do you 5-spd guys not find it uncomfortable? i need my left foot free for the clutch, so i position myself so the right foot is pretty set for the gas and the break and the left foot free. when i did the mod, it was difficult and uncomfortable to drive.
 
i wouod think just 2 ties. it would be very easy to take off. just unscrew. i really dont like the idea of just using ties. maybe just to see if you like it then go put a spacer if you liked the way it felt. i feel like its gonna fall of if you just use ties since the cable is so thin.
 
WTF how odd this thread came back up. I found it the other day and so yesterday I did it. I doubt I was ever getting full throttle. There was a TON of play in the pedal. It feels like a new car.

What I did was I cut a little section out of a cheap bic pen. Then I cut a slit the entire length of the "spacer" so it would slip over the cable. Then I just put a small piece of tape over the slit so it wouldn't fall off the cable.

Here is a pic. You can see the white section of pen...or the "spacer" and the green painters tape wrapped around it. Sorry about the pic size.

pedal.jpg