Tps sensor help please

[lxhatch91]

Hi guys i have 2 question this morning

First. Can i use the tps sensor from 2000 explorer to put on my 1991 lx .
The one i have on my stang the green wire is finish , almost cut


And my second question is ,
When my car get to 200 degree , i almost lost my rpm if i drop the clutch to fast , hard to restart and the voltage gage move a lot thanks for your help. And sorry for english write lol

 

[General karthief]

The first question I can't answer but the second one is going to be a bad starter or bad connection, start with the battery, make sure it is good and then check all the wires and connections from there to the starter. Do you have a volt meter?

 

[lxhatch91]

The first question I can't answer but the second one is going to be a bad starter or bad connection, start with the battery, make sure it is good and then check all the wires and connections from there to the starter. Do you have a volt meter?

 

[lxhatch91]

The battery and starter is good . When the car is cold is starting gold , only when the temperature get over 200 -215. Rpm stall or almost and hard to restart

 

[Mustang5L5]

No you can't use a 2000 explorer TPS. The mount is different on the throttle body, and I believe the values it will output is slightly different as well. Biggest issue is mounting up.

 

[General karthief]

Help me create the "Surging Idle Checklist"

Updated 26-Oct-2019 to clarify creeping idle RPM increase as the car is being driven. Many of you are familiar with the "Cranks OK, but No Start Checklist for Fuel Injected Mustangs" checklist and the No Crank Checklist. They are very effective in finding and eliminating the problems by use of...

forums.stangnet.com

Go through this checklist, it will help you pinpoint the problem,