• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Track problems

  • Thread starter Thread starter 5.0stang_gt
  • Start date Start date Nov 3, 2005
5

5.0stang_gt

New Member
May 8, 2005
62
0
0
Nov 3, 2005
#1
  • Nov 3, 2005
  • #1
Well first off I have a 1993 mustang gt and I took it to the shop today and they said that the car was running to lean what could I fix that with, a fuel pressure regulator maybe if so what psi would I set that up at with this combo MSD coil, shorties,o/r h pipe, MAC pro dumps, 70 mm tb, c/a intake, 73 mm MAF,timed at 14*, and u/d pullies. Srry also one more question I run a 14.46 with a 60' time of 2.099 is that right with the mods and including that it is an auto, i was reading the forums and figured I might have of messed up and got too big of a tb is that killing my time?bc before the intake, tb, and MAF I ran a 14.519 with a 60' time of 2.17. Thanks everybody
 
F

ForceFed70

That's why they call it "dope"
Founding Member
Dec 6, 1999
4,818
1
69
BC Canada
Nov 3, 2005
#2
  • Nov 3, 2005
  • #2
MY 1st question would be "how do they know it's running too lean"?

As for it being too lean... assuming everything in your engine is working properly (O2 sensor, etc). The easiest and cheapest would be to get an adjustable fuel pressure regulator.
 
5

5.0stang_gt

New Member
May 8, 2005
62
0
0
Nov 3, 2005
#3
  • Nov 3, 2005
  • #3
They pulled a code bc check engine light was on
 
5

5.0stang_gt

New Member
May 8, 2005
62
0
0
Nov 3, 2005
#4
  • Nov 3, 2005
  • #4
what psi should the reg. be set at and is the tb too big?
 

legalize420

Active Member
May 21, 2005
1,541
1
37
South Florida
Nov 3, 2005
#5
  • Nov 3, 2005
  • #5
stock heads, keep the stock tb. before my h/c i went 14.209@99.85 60' 2.3xx
 
5

5.0stang_gt

New Member
May 8, 2005
62
0
0
Nov 3, 2005
#6
  • Nov 3, 2005
  • #6
so what psi should i set the reg.
 
5

5.0stang_gt

New Member
May 8, 2005
62
0
0
Nov 3, 2005
#7
  • Nov 3, 2005
  • #7
any other opinions that think my tb is too big for my setup
 
You must log in or register to reply here.

Similar threads

Engine 87 NA - Tune or no Tune needed?
  • R82148V
  • Sep 17, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
502
Fox 5.0 Mustang Tech Sep 17, 2025
R82148V
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
482
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
841
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Engine Popping noise in the intake. Frustrated still.
  • esteban31065
  • Apr 6, 2025
  • Fox 5.0 Mustang Tech
Replies
15
Views
1K
Fox 5.0 Mustang Tech May 23, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?