• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

tranny info wanted

  • Thread starter Thread starter h82lose72
  • Start date Start date Dec 13, 2008
H

h82lose72

New Member
Sep 14, 2008
2
0
0
Dec 13, 2008
#1
  • Dec 13, 2008
  • #1
i have a 91 notch with a 302 i am going from a t5 to an auto so i was wondering what year c4 can i put in this without alot of mods. what flexplate do i use and will everything bolt right in. i am very new to the mustang so i am in the dark here. i have seen that there are differant c4 trannies, dipstick location and spline. thanks for the input.
 

Bullitt347

I have been doing it wrong this whole time
15 Year Member
Mar 23, 2007
4,061
3,133
204
Middle of Maine
Dec 13, 2008
#2
  • Dec 13, 2008
  • #2
Dipstick location is a non issue. The spline count for the input is a non issue as the torque converter that comes with the trans will be used, or you will order a converter based on the C-4 trans you get. The output shaft spine count may be different, which is no big deal as you will have to make the driveshaft longer to accommodate the shorter C-4 trans and you can get the correct yoke at that time. The thing to get right is the flex-plate. Chances are it will have to be a 157 tooth flex-plate and it HAS to be a 50 oz, imbalance flex-plate to match up the 5.0 engine balance. Otherwise the engine will have a bad vibration as the stock C-4 flex-plate is 28 oz. imbalance.
 

warriorpluto

Member
Aug 1, 2007
267
1
19
monroe.LA
Dec 13, 2008
#3
  • Dec 13, 2008
  • #3
what about the starter? i have a c6 on my 87. i currently have a 93 ministarter cause with the fat starter they were breaking. went through three within a year. so whats the best starter without breaking my pockets? and what flexplate cause i think that might be my problem.
 
You must log in or register to reply here.

Similar threads

H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
K
3.8 T5 & Bellhousing to 1987 Lincoln 5.0
  • ks65stang
  • Mar 2, 2026
  • Other Auto Tech
Replies
3
Views
562
Other Auto Tech Mar 3, 2026
Noobz347
O
SOLD FS: 18" FR500 chrome wheels and Toyo tires
  • optionizerSS
  • May 21, 2026
  • Other Classifieds
Replies
1
Views
259
Other Classifieds Jun 2, 2026
optionizerSS
O
8
87 lx 4cyl to v8 project 4 lug disc conversion questions
  • 87lx428
  • Mar 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
629
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2026
87lx428
8
T
Newbie looking for some info on speedo gears
  • TDM389
  • Nov 15, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
335
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 16, 2025
TDM389
T
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?