• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Trans help

  • Thread starter Thread starter 300mhz
  • Start date Start date Nov 4, 2005
3

300mhz

New Member
Nov 4, 2005
10
0
0
Nov 4, 2005
#1
  • Nov 4, 2005
  • #1
OK i got my car back in july, and i noticed everytime i put the car into drive i would get kinda a thump. Eventually it got worse. and my trans wouldnt shift out of first. But i just got the old trans replaced with a rebuilt one. and im still getting this knocking while putting it into drive. Im not sure if this could be being caused by the rpms..its tempermental sometimes and will idle around 100. I really need to get to the bottom of this problem.

1984 mustang LX
fuel injected
AOD trans
 

The Shape

Founding Member
Jan 11, 2002
2,224
8
49
East ARKANSAS Delta
Nov 4, 2005
#2
  • Nov 4, 2005
  • #2
Have you checked your U-joints??
 
3

300mhz

New Member
Nov 4, 2005
10
0
0
Nov 4, 2005
#3
  • Nov 4, 2005
  • #3
The Shape said:
Have you checked your U-joints??
Click to expand...

No i havent, that could be linked to these problems?
 
3

300mhz

New Member
Nov 4, 2005
10
0
0
Nov 4, 2005
#4
  • Nov 4, 2005
  • #4
ok this problem is to the point where i dont want to drive my car. I just got a rebuilt trans. and i feel im going to **** it up real fast if i drive it with this idling problem. It feels like a neutral drop when i put it into D. Im going to try to get my dad to help me loosin the pin to lower the idle. And Im going to get my U joint checked out. Is there anything i should do besides these options? something before? something after?
 

The Shape

Founding Member
Jan 11, 2002
2,224
8
49
East ARKANSAS Delta
Nov 5, 2005
#5
  • Nov 5, 2005
  • #5
You are on the right track with those two ideas. Only thing is I am not sure what "pin" you are talking about loosening to change the idle??
 
3

300mhz

New Member
Nov 4, 2005
10
0
0
Nov 5, 2005
#6
  • Nov 5, 2005
  • #6
The Shape said:
You are on the right track with those two ideas. Only thing is I am not sure what "pin" you are talking about loosening to change the idle??
Click to expand...


hmmm screw? something. i got it loosined today..it set my warm idle at about 8 or 9 hundred. but after a couple of feet of driving to get gas the idle went back up..but before i put it in D it chills out. the thump isnt too bad. so next on the chopping block is the U joint and it should be fine with all hope
 
3

300mhz

New Member
Nov 4, 2005
10
0
0
Nov 5, 2005
#7
  • Nov 5, 2005
  • #7
300mhz said:
hmmm screw? something. i got it loosined today..it set my warm idle at about 8 or 9 hundred. but after a couple of feet of driving to get gas the idle went back up..but before i put it in D it chills out. the thump isnt too bad. so next on the chopping block is the U joint and it should be fine with all hope
Click to expand...


oh another thing, some of that plastic tubing thats a part of the air filter setup is cracked..and i noticed one of the hoses.a metallic color hose. comming from the bottom that meets up with the plastic pipes going into the side walls of the car isnt even connected. if you could let me know if these things are important
 
You must log in or register to reply here.

Similar threads

C
C4 trans help needed
  • CPH89LX
  • Apr 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
344
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2026
CPH89LX
C
W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
315
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
533
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
S
idles perfect then jolts and cuts out when put into Reverse or Drive.
  • shanesstangs
  • Mar 12, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
372
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2026
General karthief
Ford truck engine swap issues
  • keel
  • Jul 7, 2026
  • Other Auto Tech
Replies
17
Views
774
Other Auto Tech Jul 13, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?