• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Transgo Install Problem

  • Thread starter Thread starter squeak_cg
  • Start date Start date Apr 17, 2005
S

squeak_cg

Founding Member
Mar 13, 2002
153
0
0
Lima, OH
Apr 17, 2005
#1
  • Apr 17, 2005
  • #1
Hello, I recently bought the Transgo AOD-HP shift kit off of ebay, did not come with video. I installed everything that came with the kit with the exception of the governer modification. Could someone clue me in on where the governer is located/how do i remove it etc. Anyways, I get everything put back together and oiled up and my car won't shift into third or OD. It will shift 1-2 fine but it won't go into third no matter what rpm its run at or what gear setting it's in. (D, OD). I also tried doing the shuffle with it to see if i could hold second and then shift it to third but no dice. Does anyone know what might be the problem with it? I haven't been able to call transgo yet because i installed it on saturday and they aren't in until monday. Thanks for any input guys.
Adam
 

jaymac

New Member
Feb 18, 2004
995
0
0
Northern Mass
Apr 17, 2005
#2
  • Apr 17, 2005
  • #2
well, I've had a few issues lately w/ my AOD rebuild that included the Transgo kit (see my sig an search my post history).
While it was being road tested at the shop initially, he couldn't get it to shift 1-2 until 5000 rpms under light throttle. He took it back out and said one of the sleeves or something was not in place all the way (or something to that effect). He pushed it in and it was fine.
then yesterday, mine wouldn't shift out of 2nd gear for a very long time. The shop was closed, and I couldn't take it apart myself, so I drove it around my parking lot at varying speeds, then after about 20 min. total it decided to start shifting again!!
My guess is that a valve or sleeve or something was hung or sticking in the VB.
Also, make sure the TV cable is properly adjusted both at the TB and the internal linkage.
Also, I'm sure you've checked the fluid level, but that could also be a cause.
But who knows, maybe just slow driving will un-stick whatever's stuck
I will probably still bring my car back to the shop to have them take a look because things that fix themselves usually break themselves again rather easily!
 
G

GR8 GT

New Member
Sep 29, 2007
2
0
0
Sep 29, 2007
#3
  • Sep 29, 2007
  • #3
Same problem, will not go into 3rd or 4th gear.

I am having the same problem with my transgo shift kit. It will not shift into 3rd or 4th gear at all regardless of the rpm. 1-2 shifts great. but also I noticed there is no engine breaking in 2nd gear, it just feels like netral until I rev it back up to the nessesary rpm to meet the speed I am traveling.

Hey squeak_cg, how did you install the Accumulator valve setup?

I installed like so:
White spring, Orange Spring, Accum Valve, Orange/Solid blue Spring, New plug w/o-ring.
I am not sure if this is correct because the instructions seem to have 2 ways to install it, Type 1 and type 2, so I installed both orange springs.
It appears that if I only install one orange spring like the type one install suggests, it dosen't fill the whole bore in the valve body and there is freeplay.

Did you install both springs the yellow and the blue with the 3rd gear plastic accumulator? I did, just because thats what the instructions show. Those are the only things that I think would screw up the third gear shift.

I will call Transgo as soon as I can to see if they know.

Any other ideas would be very helpful guys
Thanks,
 
You must log in or register to reply here.

Similar threads

P
Fuel New Eldebrock 1406 problems 1985 GT 5.0
  • Paddyman
  • Oct 22, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
179
Fox 5.0 Mustang Tech Nov 2, 2026
manicmechanic007
W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
319
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
328
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
W
I need a 1997 Mustang PATS A expert!
  • Wolfdogg
  • Oct 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
204
1996 - 2004 SN95 Mustang -General/Talk- Oct 5, 2026
Noobz347
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
735
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?