transmission bolts?

[orangecapri]

Ok, I need to know what size the stock bolts are thread wise and length wise that mount the transmission to the bell housing because mine keep getting loose and ive lost a couple and need to get some. I need to know exactly what to get so I only have to make one stop. This time their getting loctited in. Thanks in advance. Chris

 

[orangecapri]

Id like to know tonight so I can get them asap. So if anybody knows, it would help me out alot. Thanks.

 

[ALMOST STOCK]

Those 4 Bolts are Metric
12mm
Length 1-3/4"
Thread pitch 1.75

 

[orangecapri]

you sure their that small? The one that I have is 15mm headed. This is for the 5spd tranny. If I forgot, their the ones that connect the tranny to the bellhousing. 12mm just seems small, are you sure? Im not doubting you, but I just want to make sure I get the right ones. THere are 4 of them as you said. Anybody else have the size to back him up or something. Thanks Almost Stock if thats right.

 

[orangecapri]

By 12mm, are you meaning the size around, or the head size, cause my head size is 15mm on the one i have but it the treaded part is about 12mm or so, so is that what you meant? Let me know. Thanks

 

[ALMOST STOCK]

you sure their that small? The one that I have is 15mm headed. This is for the 5spd tranny. If I forgot, their the ones that connect the tranny to the bellhousing. 12mm just seems small, are you sure? Im not doubting you, but I just want to make sure I get the right ones. THere are 4 of them as you said. Anybody else have the size to back him up or something. Thanks Almost Stock if thats right.

I understand your concern.
I had my T-5 out, and on the floor when I went out and measured the bolt length and thread pitch before I replied to this thread.
http://forums.stangnet.com/showthread.php?t=386400
I'm assuming the same 4 bolts will work for you.

 

[ALMOST STOCK]

Bolt size , not the head size.

 

[orangecapri]

ok, cool. Thanks alot for the info.

 

[89MustangGX]

Good info, nice save.