• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

transmission fluid help

  • Thread starter Thread starter Crash Gordon
  • Start date Start date Sep 4, 2005
C

Crash Gordon

New Member
Aug 8, 2005
34
0
0
Mount Dora, Florida
Sep 4, 2005
#1
  • Sep 4, 2005
  • #1
Hey, I just put the tramsmission (T5) in the car, and forgot to fill it up first, I was wondering what the best?easiest way to fill it is.

I was also wondering if it is safe to fill it from where the shifter bolts in, or if i am better using a pump to pump the fluid in.

Your help would be greatly appreciated.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Sep 5, 2005
#2
  • Sep 5, 2005
  • #2
you can remove the shifter and fill from there, but the easiest thing to do is to go to autozone and get one of the push style pumps...... they are only 6$....... lots easier and good for rears, trannys, etc.....


remove the top plug with the car level, fill until it barely seeps out the top plug, then you are done. You did put regular ATF in it right?


jason
 
M

MustangvertGT

Founding Member
Jul 17, 2002
122
0
0
Montebello, Cali
Sep 5, 2005
#3
  • Sep 5, 2005
  • #3
easiest way is thru the shifter. Remove the shifter, and just pour 3 qts of ATF in there. Its faster, and more comfortable, heh.

The other way is getting under the car and using a small hose/pump and fill thru the filler plug. But this takes longer, and laying in that position gave me a few neck cramps, ,lol.

whichever you prefer.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Sep 5, 2005
#4
  • Sep 5, 2005
  • #4
i would race ya, if you prefer to debate which is faster..........we can.....

the pump holds 1 quart you fill it unscrew it and fill it again doe this three time, i have a longer hose all you have to do is remove the drain plug wait on it to drain, replace. remove the upper, push in three quarts(don't have to do anything other than kneel down), put the plug back in and go for a drive..........


your way, remove

shifter knob
shifter boot
lower shift boot
shifter handle
shifter

clean silicone, resilicone, replace shifter, lower shift boot, shifter handle, upper shift boot, shifter knob.......

serious which is quicker and easier....... but i know opinions are like a$$holes everyone has one......



jason
 
C

Crash Gordon

New Member
Aug 8, 2005
34
0
0
Mount Dora, Florida
Sep 5, 2005
#5
  • Sep 5, 2005
  • #5
thanks guys. I think Im going to just fill it through the shifter< since I havnt installed the shifter yet.

it is going to be sooo wierd driving this car again. I havnt driven it in 5 years. In 2000 I built it as a race car, and made a few dyno pulls, and had a few races, then I scared myself with it and sold the drivetrain. I just recently picked up a totalled 1995 cobra, and swapped the entire drivetrain. It should be a fun little daily driver.
 

mo_dingo

20+ Year Stangneter
Aug 26, 2003
3,031
2
58
Tucson, AZ
Sep 5, 2005
#6
  • Sep 5, 2005
  • #6
Since you have to loosen the fill plug to get the proper amount of fluid in the transmission, use that to fill it.

Just remove the shift knob, then the plastic trom piece that goes around it. Leave the shifter in place. Then get a funnel with a 2 ft tube attached to it, fish the tube through to the trans fill hole, stick it in, and then you can fill it inside the car. Once it starts to spill out (appx 2.5qts), you are done. Put some thread sealer on the plug and install. Done
Scott
 
C

Crash Gordon

New Member
Aug 8, 2005
34
0
0
Mount Dora, Florida
Sep 5, 2005
#7
  • Sep 5, 2005
  • #7
thanks guys. Got it done. Got the car started and drove it today. Now I just need to get it registered. The tag expired in 2000
 

mo_dingo

20+ Year Stangneter
Aug 26, 2003
3,031
2
58
Tucson, AZ
Sep 6, 2005
#8
  • Sep 6, 2005
  • #8
Crash Gordon said:
thanks guys. Got it done. Got the car started and drove it today. Now I just need to get it registered. The tag expired in 2000
Click to expand...

2000...ouch.....
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Sep 6, 2005
#9
  • Sep 6, 2005
  • #9
i don't know about there, but here if you sign paperwork sayign the car has been sitting as in torn up or immobilized they will waive the fee..........


jason
 

94Blue302GT

Member
Oct 20, 2003
704
3
19
Chicago
Sep 6, 2005
#10
  • Sep 6, 2005
  • #10
I don't see why you can't just go through the shifter...
All I see there is a big shiny steeda shifter, no boots in the way or nothin, lol
 
C

Crash Gordon

New Member
Aug 8, 2005
34
0
0
Mount Dora, Florida
Sep 6, 2005
#11
  • Sep 6, 2005
  • #11
yeah, They waived the fee for me, b/c when I took it off the road I turned in the license plate.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Sep 6, 2005
#12
  • Sep 6, 2005
  • #12
good to hear.......
 
You must log in or register to reply here.

Similar threads

Proper Transmission fluid for a 84nwc t5
  • Sask84gt
  • Mar 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
536
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 10, 2026
Sask84gt
C
C4 trans help needed
  • CPH89LX
  • Apr 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
224
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2026
CPH89LX
C
C
Electrical Under dash wiring
  • ChicagoMustang
  • Apr 17, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
132
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
401
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
S
Need help asap
  • shaggyman65
  • Dec 24, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
261
1996 - 2004 SN95 Mustang -General/Talk- Dec 24, 2025
shaggyman65
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?