Trick Flow Dual Intake

Sabio · Oct 10, 2004

Who have this Dual EFI 302 Intake from Trick Flow laying around in the garage and want to sell it to me?

Sabio · Oct 11, 2004

squeeeg · Oct 12, 2004

I have never even see that intake. But i like it reminds me of that roush one that they made for the SN95.

85_SS_302_Coupe · Oct 12, 2004

I'm gonna have to call that some kind of prototype...it's even got 2 throttle bodies....The only intake like that i've ever seen were the Roush one that's almost like that, and the custom one that's on that Super Mustang that Ford built...i can't remember what it's called but it's a couple different colors and has like 1000hp or something..

speedytang · Oct 13, 2004

I have old Super Ford articles talking about that intake and I am thinking the early 90's and it was short lived. I have seen it on a few Street Rods but the problem with that intake is the same problem now if it is not Drive-By-Wire it is getting them to Sync with each other.
If I can find the write up I will scan and post the article.

281pony · Oct 13, 2004

85_SS_302_Coupe said:
I'm gonna have to call that some kind of prototype...it's even got 2 throttle bodies....The only intake like that i've ever seen were the Roush one that's almost like that, and the custom one that's on that Super Mustang that Ford built...i can't remember what it's called but it's a couple different colors and has like 1000hp or something..

you mean the super stallion?

85_SS_302_Coupe · Oct 13, 2004

88SC_GT said:
you mean the super stallion?

Yea that's it....for some reason i couldnt remember that....isnt it like, blue/green/white or something?

Sabio · Oct 15, 2004

speedytang said:
If I can find the write up I will scan and post the article.

Hey speedytang,
did you find something!would be very interesting to me to read!

87GT 306 · Oct 15, 2004

I've seen that one before in a tech book but not on a car. Yea the only ones I've seen like that were from the stallion and there was also a fox body red GT that was a twin turbo prototype but I forgot who designed it(I think it was roush). Anyways it was a twin throttle body design just like that trick flow one. Then a few years later they came out with the roush intake for the 94-95 models. I'd really like to get an older intake like that. You see hundreds of cobra intakes and similar ones wherever you go. I was at a show one time and a guy popped his hood and had a roush 3 piece intake inside and everyones jaw dropped. The BXR intake was pretty amazing too but wayyy to much of a PITA to install.

Sabio · Oct 15, 2004

87GT 306 said:
there was also a fox body red GT that was a twin turbo prototype but I forgot who designed it(I think it was roush). Anyways it was a twin throttle body design just like that trick flow one.

Yes,you´re right it´s a Roush intake!Ford contracted him to build a 25 th Anniversary,but the Mustang did not make Production.It´s on a 5.8 liter EFi Twin Turbo with 380 hp at 5000rpm.

PhLoBuS · Oct 15, 2004

also reminds me of the new BBK SSi intake

Dan95-5.0 · Oct 15, 2004

i saw that trickflow intake in a magazine where they built some kind of stroker monster. its was a 351 with a 400 crank or something like that. cant really remember, but they used that intake manifold and the picture you posted is off of it. it looked pretty cool too. this magazine was old school tho, mayber late 80's or something.

be prepared to pay some big $$$ for that think, I wonder how many they made???

88stangmangt · Oct 15, 2004

5.8 twin turbo only 380hp???? wow what a waste of 2 turbo's.............

Sabio · Oct 16, 2004

88stangmangt said:
5.8 twin turbo only 380hp???? wow what a waste of 2 turbo's.............

Ohhh! I forgot to mention the 1000 lbs/ft of torque

1994v6-v8 · Jan 9, 2006

How would the mass air work? If you had two how would you wire them and would it work?
D

grey5.0beast · Jan 9, 2006

True that!

1SLO306 · Jan 9, 2006

PhLoBuS said:
also reminds me of the new BBK SSi intake

dont see how, they look nothin alike IMO

1SLO306 · Jan 9, 2006

Sabio said:
Ohhh! I forgot to mention the 1000 lbs/ft of torque

but still 380hp and 1000tq dont go together. that car would be like a turtle from a roll race.

Maryland Stang · Jan 10, 2006

blake89stang said:
but still 380hp and 1000tq dont go together. that car would be like a turtle from a roll race.

Yeah, but he'd be able to pull a semi trailer.

Sabio · Jan 10, 2006

1994v6-v8 said:
How would the mass air work? If you had two how would you wire them and would it work?
D

You need a device like the one from Interactive Systems & Technologies
Look here for the "Air Adjuster Dually": http://www.mass-air.com/Products.htm

Trick Flow Dual Intake

Sabio

Attachments

Sabio

squeeeg

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

speedytang

281pony

Active Member

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

Sabio

87GT 306

New Member

Sabio

Attachments

PhLoBuS

New Member

Dan95-5.0

Active Member

88stangmangt

Active Member

Sabio

1994v6-v8

New Member

grey5.0beast

Cookies should never be DUNKED!!!

1SLO306

My 97 GTP owns you ALL!

1SLO306

My 97 GTP owns you ALL!

Maryland Stang

Active Member

Sabio

Similar threads

Trick Flow Dual Intake

Attachments

it sucks (I know) to be on the receiving end

Active Member

it sucks (I know) to be on the receiving end

New Member

Attachments

New Member

Active Member

Active Member

New Member

Cookies should never be DUNKED!!!

My 97 GTP owns you ALL!

My 97 GTP owns you ALL!

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency