• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Trick flow intake

  • Thread starter Thread starter 87_stang
  • Start date Start date Oct 1, 2007

87_stang

Member
Dec 12, 2005
131
0
16
Tonganoxie, KS
Oct 1, 2007
#1
  • Oct 1, 2007
  • #1
I am about to replace the orings on my injectors and cannot get my intake off. I can get to the bolts on the 4 corners but can't find a socket to get my 2 top bolts off. It is a 12 point and is inset in a hole on the intake and looks to be a 3/8 or 10mm but I can't find one. I can go get one but would like to know what size it is for sure before I drop alot of money on 2 full socket sets. I have tools out my a$$ and really don't need anymore except for this 1 socket. Thanks guys/gals.
Brandon
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Oct 1, 2007
#2
  • Oct 1, 2007
  • #2
5/16" 12pt.
 

87_stang

Member
Dec 12, 2005
131
0
16
Tonganoxie, KS
Oct 1, 2007
#3
  • Oct 1, 2007
  • #3
Thank you sir!
 

jtfairlane

New Member
Mar 5, 2006
468
3
0
Oct 1, 2007
#4
  • Oct 1, 2007
  • #4
Why would you buy two full socket sets just to get two sockets? Almost all parts stores and hardware stores sell INDIVIDUAL sockets.
 

87_stang

Member
Dec 12, 2005
131
0
16
Tonganoxie, KS
Oct 1, 2007
#5
  • Oct 1, 2007
  • #5
Because I didn't know what size and if they were standard or metric. So I would have bought a small set of each.
 

Chuckman

GTFO you fat, heavy bastard
15 Year Member
Oct 21, 2005
1,604
1,002
173
st. louis, mo
Oct 2, 2007
#6
  • Oct 2, 2007
  • #6
jtfairlane said:
Why would you buy two full socket sets just to get two sockets? Almost all parts stores and hardware stores sell INDIVIDUAL sockets.
Click to expand...

its always good to have a whole set just so you dont have to keep running to the store to get one tool whenever you find you need another size. been there, done that. plus its cheaper to buy em as a set than to get them all individually.

btw, 12-point 5/16's for the top two, 12-point 3/8 for the lowers and the passenger side ones you can actually get a socket on, drivers side needs a box end wrench.
 
You must log in or register to reply here.

Similar threads

Resolved 1999 cobra removed lower intake manifold to crossovertube
  • hvcobra99
  • Sep 6, 2026
  • SVT Tech Forum
Replies
0
Views
167
SVT Tech Forum Sep 6, 2026
hvcobra99
J
Exhaust manifold to Y-pipe nut & stud dimensions?
  • joeybuddy96
  • Jul 7, 2026
  • SN95 V6 Mustang Tech
Replies
2
Views
221
SN95 V6 Mustang Tech Jul 9, 2026
joeybuddy96
J
L
1996 harmonic balancer crank bolt. Help!
  • Lost in Palm Bay
  • Jul 21, 2026
  • SN95 V6 Mustang Tech
Replies
6
Views
313
SN95 V6 Mustang Tech Jul 24, 2026
Lost in Palm Bay
L
B
Fuel 1990 installing edelBrock intake
  • Beaker
  • Oct 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
345
Fox 5.0 Mustang Tech Oct 6, 2026
Noobz347
SOLD Trick Flow Box R Series Upper Intake w/90 mm Inlet
  • Habu135
  • Apr 30, 2026
  • Engine and Power Adder
Replies
2
Views
400
Engine and Power Adder Aug 19, 2026
Habu135
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?