N nightkids1 New Member Jan 12, 2006 9 0 0 Riverside, ca Feb 23, 2008 #1 Feb 23, 2008 #1 what would u recomend i use? i have a drimel not sure if that would work? any sugestions?
bigcat start with the upper hole, and if more traction is May 1, 2005 3,015 1 79 7200 feet Feb 23, 2008 #2 Feb 23, 2008 #2 hacksaw blade, used manually. that way, you can have a more careful eye, and any mistakes will be caught before it is too late.
hacksaw blade, used manually. that way, you can have a more careful eye, and any mistakes will be caught before it is too late.
1367mustang New Member Nov 7, 2007 14 0 0 Feb 23, 2008 #3 Feb 23, 2008 #3 Bumper I would use a template made of card stock from my right side cutout. Then use a coping saw to cut left side, Nice narrow blade and a finer cut. IMOI Regards Brian
Bumper I would use a template made of card stock from my right side cutout. Then use a coping saw to cut left side, Nice narrow blade and a finer cut. IMOI Regards Brian
T The Fang Member Sep 11, 2005 602 0 16 Tallahassee Fl Feb 24, 2008 #4 Feb 24, 2008 #4 I used tin snips and it came out perfect. Make a cardboard trace from the other side.
M mattzts Member Jun 27, 2005 160 0 16 clifton, nj Feb 24, 2008 #5 Feb 24, 2008 #5 i actually used a dremel to do mine. i made a rough cut, then used a sanding attachment to round it out.
i actually used a dremel to do mine. i made a rough cut, then used a sanding attachment to round it out.