turbo coupe rear disc on a mustang rear

Yes, they'll slide right in. You'll have too use the axles also, but everything will bolt right on without any mods.

The housing is actually the same as the mustang one with the exception of where the quad shock holes are. You can use the TC axles and brakes on the stang housing but then it will be 3/4" wider on either side. Other options are to keep the stock length axles and get the offset brackets that work with the TC calipers and rotors ( I think its like North Race Cars or something like that that markets them now) , or modify the TC brackets to mount 3/4" further back on the housing. I have done it but the offset brackets are probably your best bet if its in the budget.

Stock length rear axles with brackets, this is your best bet so you dont have wheels fitment problems. Those T-Birds also came with 3.55 or 3.73 gears, so take them out also.

Tonys89GT said:

Stock length rear axles with brackets, this is your best bet so you dont have wheels fitment problems. Those T-Birds also came with 3.55 or 3.73 gears, so take them out also.
]

Click to expand...

What bracket is that?? Is it aftermarket?? Or did you modify the stock one??