What kind of undercoating did you guys used for rust prevention? Also what should I stay away from when spraying? Should I clean everything really good before I spray it? Any info would be great.
How does this look for a daily driven stang that wants to eat LS1's all day long. Might take a little while but Im getting a stock 5.0 HO out of a Mark IV really soon.
302 deck and lined bored 30. over. Anything else here?
Eagle forged steel crank
steel H-beam rods
JE 10.5:1 froged flattop pistons
D.D.S main stud gridle
Moroso oil pan deep rear sump 7 quarts
windage tray
high volume oil pump
Any suggestions I should change? I'm gonna do the bottom first and then later do the top end. And just drop the complete motor in and go. I'm staying NA. AFR 165's, Ed Curtis custom cam and RPM 2 intake. Will this get me into the 11's fairly easily? Thanks just want to get everything set before I start buying.
How does this look for a daily driven stang that wants to eat LS1's all day long. Might take a little while but Im getting a stock 5.0 HO out of a Mark IV really soon.
302 deck and lined bored 30. over. Anything else here?
Eagle forged steel crank
steel H-beam rods
JE 10.5:1 froged flattop pistons
D.D.S main stud gridle
Moroso oil pan deep rear sump 7 quarts
windage tray
high volume oil pump
Any suggestions I should change? I'm gonna do the bottom first and then later do the top end. And just drop the complete motor in and go. I'm staying NA. AFR 165's, Ed Curtis custom cam and RPM 2 intake. Will this get me into the 11's fairly easily? Thanks just want to get everything set before I start buying.