Upper and lower intake question

[HighlyVenomous]

I was wondering what the advantages and disadvantages would be to installing a Trick Flow STREET Heat upper and lower intake (summit part # 51500001) on a 94 cobra with 75mm MAF, 70mm throttle body, 24lb/hr injectors, and MAC fenderwell CAI. Any help would be greatly appreciated.

 

[swingline]

Your Cobra intake is pretty good. You probably won't see any difference in an intake swap if you don't change out the heads. Also, I wouldn't go with a 70mm throttle body, 65mm will be plenty. Also I am pretty sure that your Cobra already has 24lb injectors. I may be wrong though....

 

[ninety15.0]

Yea i also dont think that you are going to see a big difference going from the cobra to the street heat. the cobra is a pretty good intake as is. I would also agree that a 70mm TB is a little big too. If you are doing H/C/I all at the same time...a different intake might be a better investment.

 

[swingline]

Even with new heads and cam, there are plenty of guys making good power with that intake. Just get it port-matched to the heads and you'll be OK.