UPR E/L gauge face problems..

onefastgt

New Member
Jun 26, 2002
44
0
0
Pittsburgh, PA
The instructions state that to NOT remove the needles. Well mine is one piece and there is no way to not remove a few needles to get the gauge overlay onto the original. Now, all my gauges except the battery are reading incorrectly. Also,
the odometer looks cloudy, hardly visible. It appears that the material of the gauge cluster is clouding the small area where the odo. reads. What the F***
do I need to do???? Please help!! :shrug:
Thanks,
Jeff
 
I just installed those el glow guages today and was able to slide them under all of the gauges without removing them. It was very tedious but rewarding because they all seem to read accuratly. I also have the cloudy odometer and havent figured a solution to it yet and to fix the needles use this guide to fix your needles.
 
I got mine to slide in as well. Wasn't too tricky, just took a little contorting and wiggling.

I modified my gauge face setup. I trimmed away all the white for the warning lights and turn signals and trimmed away the cloudy "window" over the odometer.


You need to be VERY careful when trimming the window because it leaves frayed edges. I used a file to help smooth it all over.

Here you can see my modification
View attachment 508964

I can't even notice anymore.

I love these gauges at night. Get tons of compliments of the look, both night and day
View attachment 508965