V6 Dual Exhaust

[cjmorrell]

I am getting ready to put on the Magnaflows on my stang. Before I take the hammer and chisel to the rear valance. Does anyone have some hints on how to make the rear vlance driver side cut out go nice and easy and with good results?

Thanx in advance for your help!

Cliff

 

[Jimp]

http://www.burdweiser.com/Mustang/mustang_exhaust.htm
That is Rygen's very nice write-up I believe.

 

[The Fang]

Yea, I used a pair of tin snips after I put them on. But get yer pipes strait first and rattles worked out.
Magna went up 50 bucks after I bought mine.

 

[cjmorrell]

Ok, the Airaid CAI is installed, the Magnaflows are in, not tightened up yet. Time to take a break and get back at it in the morning. The hardest part was getting the over-axle pipe off. The reciprocating saw and a metal cutting blade had it off in 30 seconds. Cutting the valance will come after a good nights rest and time to think about the best way to go at it.

Thanx for the input! I'll let you know how it goes. The wife said she doesn't want to be around when the hammer and chisel start chipping away at the valance.

 

[afixer]

here is what i did
http://www.2005stang.com/viewtopic.php?t=1358

 

[cjmorrell]

Looks great, NICE RIDE! Thanx for the input. I'll be going at it here shortly! I'll post some pics and let you all know the outcome.

Have a great Mustang Day!

 

[hutcccch]

If im going to buy JBA exhaust system , should i get the JBA headers too ?

 

[Jimp]

If im going to buy JBA exhaust system , should i get the JBA headers too ?

You can, but you don't have to. JBA is overpriced IMO.

 

[hamidlmt]

If im going to buy JBA exhaust system , should i get the JBA headers too ?

the jba headers are great. They really open up the exhaust note, give quicker revs and a modest increase in power.

 

[cjmorrell]

The Magnaflows are on, how sweet they are. Cutting the valance was a piece of cake. Now for the Xcalibrator 2!

 

[rygenstormlocke]

The Magnaflows are on, how sweet they are. Cutting the valance was a piece of cake. Now for the Xcalibrator 2!

Cool, how about some pics.