Vacuum Tree

Guero

Active Member

Oct 11, 2005

2,148

0

47

Feb 26, 2009

#1

• Feb 26, 2009

• #1

Can I remove it from its stock location and place it somewere less visible? Im hiding most of my wires and with this also out the way it would look alot better to.
The only reason I ask i cuz I havent really looked at it and since im at work I cant see it there is something on the firewall that it has to be placed there.

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Feb 26, 2009

#2

• Feb 26, 2009

• #2

Hose length and vacuum tree position are not critical. Just be sure to use the same size supply hoses from the manifold to the vacuum tree and the tree to the power brake booster. The small hoses use the original size hose too.

 

L

Lawbreaker5.0

Member

Feb 20, 2009

543

2

18

Texas

Feb 26, 2009

#3

• Feb 26, 2009

• #3

i just recently hid all the wires on the driver side + the vacuum tree and the map sensor.

i can't find the pic of the vacuum tree on my online ablum (i'm at school) but when i get home later i'll find a pic. here is a pic after i was done


still needs to be filled in and painted but i will do that when i put in the 351

Actuallyl it looks better than that i flipped the coil wire and moved in down a little

 

L

Lawbreaker5.0

Member

Feb 20, 2009

543

2

18

Texas

Feb 26, 2009

#4

• Feb 26, 2009

• #4

the picture quality is bad but you should be able to get an idea of where i put mine

View attachment 269110

 

Guero

Active Member

Oct 11, 2005

2,148

0

47

Feb 26, 2009

#5

• Feb 26, 2009

• #5

Nice! I dont plan on making my engine bay show quality but hiding wires does make a huge difference!!!!