I had the same problem with my 02. I got a piece of packing foam (not styrofoam) from a toner cartridge box at work. I rolled it up and stuffed it inside the weather stripping right where the top of the speaker is. There is no more noise, and you can't see the foam because it is inside the weather stripping.
Rusty67:
The window probably needs to be adjusted. There are guides along the bottom of the window or on the main rail. I think that 15 minutes in the body shop will have the window set up just right. The interior trim panel should be off the door before you get to the shop ("to save you some shop time"). If you have a full shop manual, there are instructions in there. The Haynes manual doesn't describe the adjustment(s).
HTH,
Chris
The window probably needs to be adjusted. There are guides along the bottom of the window or on the main rail. I think that 15 minutes in the body shop will have the window set up just right. The interior trim panel should be off the door before you get to the shop ("to save you some shop time"). If you have a full shop manual, there are instructions in there. The Haynes manual doesn't describe the adjustment(s).
HTH,
Chris
There has been a TSB for this..
Check it: --> TSB's and Special Messages
Scroll almost to the bottom..
Riley
Check it: --> TSB's and Special Messages
Scroll almost to the bottom..
Riley