• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

weird engine problems, whatcha think?

  • Thread starter Thread starter Turpin5.0
  • Start date Start date Aug 28, 2004
T

Turpin5.0

New Member
Jul 25, 2004
19
0
0
Aug 28, 2004
#1
  • Aug 28, 2004
  • #1
So for the past month or so I have been having some problems with my car. About 40% of the time it runs like crap. From the idle being very rough and the car shaking, it has absolutly no power at all. and it feels like it is missing constantly. But the symptoms will just cease like all of a sudden. when I come to a stop and take off, the car will run fine again... This has had be boggled. I changed the fuel filter and it ran fine for 3 days, but now its to the same ole thing.
But whats really odd is that when it is running crappy and I get on it, when it hits 4k it runs fine for a second. then back to crappy. And vice versa. When running fine, and I hit 4k it runs crappy for a second!??? So I dont know whats going on and I dont want to spend money on things to fix it if I really dont know what it is. ( I'm saving for a new T-5) I dont think somthing is broken, because that would cause bad running all the time, correct?

The way it feels is like a 6cyl that has ten billion miles on it, its so weak and jittery. It shakes really bad when it runs crappy. For example on how weak it is, when starting from a role in 1st I can floor it and there will be NO tire slippage at all! Usually i can spin to 3rd gear.

I know this is a weird problem but if any of you guys know, think you know, or even have a idea that would be a great help.

Thanks alot
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Aug 28, 2004
#2
  • Aug 28, 2004
  • #2
Make sure you car is in good tune. Have you recently replaced your tune up items? Like plugs, cap, rotor, wires.....etc. If so I would check all of you electrical connections. Also check your fuel pressure with a gauge you can read while driving.
It could be a number of things so you might just have to keep trying different stuff. Just start with the basics and then go from there.
 
T

Turpin5.0

New Member
Jul 25, 2004
19
0
0
Aug 28, 2004
#3
  • Aug 28, 2004
  • #3
I have done everything except cap and rotor, but it seems in good shape. I did wires, and plugs, and a coil. I checked all my connections and they seem fine. BLAHHH it irritates me
 
C

casey4093

New Member
Nov 15, 2003
15
0
0
Gulfport, MS
Aug 28, 2004
#4
  • Aug 28, 2004
  • #4
have you checked all of your vacumme lines? an intermittant leak would cause those problems
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Aug 28, 2004
#5
  • Aug 28, 2004
  • #5
have you pulled codes? do the balance test when you run them. this will tell you if all the injectors are firing alright.

good luck.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,811
234
Dublin GA
Aug 28, 2004
#6
  • Aug 28, 2004
  • #6
Dump the codes and see what the computer says is wrong…

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.dalidesign.com/hbook/eectest.html for more descriptive help
OR
See http://www.mustangworks.com/article...c-iv_codes.html

IF your car is an 88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Walmart .
 
You must log in or register to reply here.

Similar threads

Engine Surging idle on start-up
  • keel
  • Aug 11, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
747
Fox 5.0 Mustang Tech Oct 31, 2025
keel
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
470
Fox 5.0 Mustang Tech Saturday at 5:11 PM
alutwon
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
702
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
D
66 Coupe Progress Thread
  • DTCRAWLEY
  • Apr 19, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2
Replies
38
Views
633
1965 - 1973 Classic Mustangs -General/Talk- Wednesday at 10:27 PM
General karthief
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?