well i got in the 12s

78cobra347

78cobra347

New Member
Oct 17, 2003
164
1
0
Calgary Alberta
#1
It was a humid nite as dew was all over my car but the track was a very good prep lots of VHT. I had my 26x10.50x15 M/T Sportsman tires

The air was above 5000 feet first run 8.17 in the 1/8 and 12.98 1/4 mile with a 1.82 60' time 11:08 pm

Second pass 1.79 60 foot 8.12 in the 1/8 and 12.95 at 100.8 mph 11:47pm

Still have a low mph maybe the 65% humidity is holding that back a little.


here is a 13.21 vid from 2 weeks ago http://www.putfile.com/media.php?n=RaceCity
last nite my camera bud left early as there was many delays (ricer blew his turbo big mess)
 
#4
87 TC motor
Many hours spent on head porting stock valves with shimmed springs
Gutted upper and ported lower
RR cam
E6 ported
T3 .60/.63 Buick GN cold side
boost was 26 psi
Pump gas and some C-16 50/50
190 lph / afpr both holley
C-4 with 3000 stall
8.8 with 3.55s
Lake wood adjustable lower control arms
Alum drive shaft

It looks very stock

478078_83_full.jpg
 
#7
Slow92LX said:
Congrats! The car looks great too! Keep teachin them Chevys a lesson!
Click to expand...


Thats is whats its all about. I like to spank them modded 5.0s alot also.

On that night i raced a friends newly blown 306 78 Mustang II Paxton 7 psi enclosed carb kit. i had him bye 4 to 5 car lenths was great.
 
#8
Here is a funny 1, Procharged with FMIC (10 lbs boost) 5.0 on slicks and a stick.

Was my first run on the Sportsman PROs did not hook, burn out to short 2.0 60'

His dad laughed at my car when he saw the 2.3 badges on my fender.

His best run on the last friday was 13.2 at 102, wish i had got another crack at him with 1 of my 12 second passes.

here is the vid right click and save as
http://www.calgarystreetracing.net/movies/TurboVsSupercharger.wmv
 
#10
what is your cam set at? straight up?

my mustang has

moderately ported head
ranger cam
ported E6
LA3
T3
3" exhaust
HUGE K&N
Starion FMIC
T5

thats how i got it...we're doing the MAF install, AFPR, better exhaust and tuning

then comes the water/methanol injection (not tuning for it, just letting it help so it wont rely on it, in case it runs out, this is my daily)


the truck's mod list is about 20x that
 
#13
Mr. Merk said:
what is your cam set at? straight up?

my mustang has

moderately ported head
ranger cam
ported E6
LA3
T3
3" exhaust
HUGE K&N
Starion FMIC
T5

thats how i got it...we're doing the MAF install, AFPR, better exhaust and tuning

then comes the water/methanol injection (not tuning for it, just letting it help so it wont rely on it, in case it runs out, this is my daily)


the truck's mod list is about 20x that
Click to expand...


If you are asking about my cam it is a stock gear straight up.
 
You must log in or register to reply here.
Top Bottom
Back
Forums
Menu