buy this if you want to do it yourself... http://www.thefordsource.com/store/motorsports/electronics.htm
same price, MUCH BETTER
same price, MUCH BETTER
When I think of a full tune up this is what I think of.
Plugs
Wires
Cap
Rotor
Fuel Filter
Air filter (replace if it is a paper filter, clean it if it is K&N)
PCV Valve (also clean/replace the screen underneath)
Clean IAC valve
Clean EGR valve
All of that is simple and you can do it in your drive way in about 2 hours tops.
Plugs
Wires
Cap
Rotor
Fuel Filter
Air filter (replace if it is a paper filter, clean it if it is K&N)
PCV Valve (also clean/replace the screen underneath)
Clean IAC valve
Clean EGR valve
All of that is simple and you can do it in your drive way in about 2 hours tops.
Michael Yount said:
Yep...and clean your throttle body and IAC out (cylinder shape on throttle body)...just spray them down with carb cleaner...and check your throttle position sensor (TPS)...
If for some reason you take off your intake to change out the pcv valve/grommet/screen you could always take out your injectors and clean them out...and there is nothing wrong with checking for vaccum leaks or checking vacuum hoses for cracks or wear...
Good Luck with it..
Oh and don't get the platinum plugs...it is just a waste of money...